0
Answer for USA, Canada and countries running a 60 Hz power supply service.
In order to plug your 3 wire stove into a 4 wire outlet, the easiest way to do so is to change the cord on the stove. This does not require cutting power to the outlet or anything like that.
Anyone who is going to be changing the power cable on any device knows that you need to unplug the cord first, eliminating the need to cut power to the outlet.
The difference between a 3 prong and 4 prong outlet is the ground wire. Both provide 240v power by supplying 2 120v wires (red and black). There is also a white wire, which will be your neutral wire.
The green wire is your ground, and should be bolted to the body of the stove. (Most appliances have a location for attaching the ground wire).
When connecting your wires, there should be 3 wire locations. You should connect one of the two hot wires (red or black), then your white wire in the middle, and then your other hot. The green will be your ground.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Can an apartment size stove be pluged into any outlet?
Can an apt. stove be plugged into a outlet
How do you convert a 4 plate stove which uses a circuit breaker to a wall plug?
You still need a circuit breaker. From your question it appears your stove is hardwired to the panel. It is perfectly acceptable to connect it to a suitably specified outlet and plug for the voltage and amperes for the stove. Basically you would turn off the breaker, install an outlet on the floor or wall so as not to interfere with stove. You can buy cords with the proper plugs and mating receptacles in most any hardware store. For an electric stove with an oven you are usually talking about a 50A breaker and the corresponding outlet and plug. This can be dangerous and if you are not sure of what you are doing an electrician is highly recommended.
Where are fuses located in an inglis stove?
the one ten outlet doesn't work on my stove
Can you use your dryer outlet for 120 v with an adapter?
Yes. The outlet on the stove should be rated to 15A 110V.
How do you connect a three prone power cord to the stove?
To connect a three prong power cord to a stove, remove the back of the stove and take off the old cord using a screwdriver. Connect the new cord according to the wire colors with the screwdriver.
Will an electric dryer shock if it is plugged into an electric stove outlet?
You bet it will.
Where can you buy stove appliances?
Stove appliances can be bought from many different stores and retailers. Some examples of stores that sell stove appliances include Sears Outlet and Bed Bath & Beyond.
Do you need to replace a 240V outlet for the stove if it makes a cracking sound when the stove gets turned on?
Could be the outlet, could be an open wire, could be a loose connection. First thing I would do is check that the connections are tight. Then replace the outlet. That leaves the wiring... The connection is probably corroded. Check the plug, if it's black and pitted you probably should replace both the plug and outlet.
What is the difference between a 4 prong dryer outlet and a 4 prong stove outlet?
The four blade dryer plug brings a separate ground wire from the machine to the electrical grounding system. The three blade dryer plug depended on the neutral wire of the plug to make this connection.
How high off the floor should a outlet box be?
As close to the floor as possible, or on the floor. Remember you want the range to sit back against the wall. So you must mount the outlet so it goes into the opening at the bottom of the stove. Otherwise when you plug it in, the plug will hit the back of the stove.
If your outlet is a 3 prong outlet can you hook up a 3 prong plug from your old stove to a new stove which has a 4 prong plug?
No you can not you will need to replace the plug with a 4 prong the same as the style of your oven and change your breaker to the correct Amp for your style of 4 prong plug
How do you wire a 3 wire 240 volt stove to a 240 volt 4 wire feed?
Change the cord/plug on the stove to a four wire cord/plug. When installing the new plug remove the grounding strip that connects the center lug in the stove wiring block to the frame of the stove. Connect the white wire from the new plug to the center lug. Connect the green wire from the plug to the stove frame.
