i think you should drill through the wall slowly The question was about drilling an hole in a mirror. I think the correct way to do this is to mark out where the hole is required, get some putty and form a cupped mound below, fill with varsol or white spirit, and drill the hole slowly with a special glass drill bit. You must keep the bit lubricated with the liquid to dissipate heat and prevent the mirror from cracking.
Twice as large
Possibly but not likely. If it has an internal fuse it can be fixed. If not then it is more than likely ruined.
Two major ways whereby nitrogen is fixed in ecosystems are through rainfall and through leguminous crops.
No. Most light fixtures are designed to be mounted on electrical boxes which are fixed to the building frame work. Mounting the fixture without a box leaves the connection open on one side to a combustible surface. If a problem arises with the connection and heat is generated a fire could start. A surface mounted fluorescent is allowed to be mounted without a box. This is because the connection to the ballast is made inside the metal enclosure of the fixture.
The best light fixture for bathrooms is probably one that is fixed to the ceiling, with a plastic or glass casing over it. This is to keep from possible steam from a hot shower or bath from collecting on the bulb, or any liquid period.
Twice as large
Often, a spring loaded mechanism on a LH side view mirror cannot be fixed. The mirror will need to be replaced instead of being fixed.
Under Ledger : Furnitures & Fixture under : Fixed Asset
A baton, or other fixture is first fixed to the outdoor wall, usually with masonry nails of screws. The light fixture itself is then attached to this baton.
Yes you can, but most police officers will give you a warning to get it fixed (some will ask you prove you did have it fixed) and you should get it fixed!
No a VSR is not a hammer drill. VSR means Variable Speed Reversing. This is because in the old days most electric hand drills ran at a fixed speed and often could not reverse. -A hammer drill has a much more complex transmission than a standard drill, and is much more expensive.
You can get a fixed line of credit through your bank and also through a consultant. You can get a fixed rate through a home equity loan. Or through a credit repair company.
I expect that you can buy the mirror online but I had mine fixed at a local glass shop. They purchased or cut a mirror to fit and they glued it over the cracked one.
Possibly but not likely. If it has an internal fuse it can be fixed. If not then it is more than likely ruined.
It is a moving violation in CA to drive with a broken passenger side-view mirror. It is important to get it fixed ASAP.
Yes, it is a noun. It means something securely fixed in place, such as plumbing or lighting. It can mean someone who seems constantly present at one place.
Fixed assets depreciate because through depreciation process cost of fixed asset charged to all those fiscal years in which that fixed asset is used.