Often, a spring loaded mechanism on a LH side view mirror cannot be fixed. The mirror will need to be replaced instead of being fixed.
If your car is on and your driver side mirror motor is working then it can be anything from a break in a wire to a stripped gear in the mechanism to the mirror motor going bad.
Cannot be tighten, replace the mirror assy..
the gas door is spring loaded. press in on the right side of the little door and it should spring open.
Spring loaded belt tensioner on the lower driver side.
On the front of the engine about 7 inches below the top of the head on the right side.
There's a retractor or "recoil" spring mechanism that attaches to the side of the belt spool down in the bottom of the area behind the door. The spring side of the keyway that fits to the metal belt spool is plastic and eventually gives away causing the spring to no longer engage the belt spool.
Should be located on the top of the starterRemove starterRemove 2 screws on side of solenoidTwist solenoid (spring loaded) to remove
The Mirror Crack'd from Side to Side has 256 pages.
The Mirror Crack'd from Side to Side was created on 1962-11-12.
Get a big slotted screwdriver and push down on the spring-loaded screws on either side of the cap and turn them outwards.
if you made one side of mirror opaque,other side will become a mirror.
If you look on the bottom side of the mount, there should be a hole or indention. There is a spring on the inside of that and it has to be depressed in order to remove the mirror.