There is probably a small piece of paper jamming the switch inside the slot.
The switch is triggered as you push the paper in, it is very sensitive and light and can be easily jammed in the run position.
Be careful and make sure it is unplugged before putting you fingers near it.
Try using a small piece of paper and sliding it sideways in the slot to clear any debris.
If all else fails you may have to take the machine head apart to clear shreds of paper from the cutters and sensor switch.
you take a piece of paper and cover it in baking soda. stick it under the key pad and press the key down then slowly pull the paper out. this works on all key pads.
Yep. Might even cause the engine to stop running forever when it overheats and seizes up. Your engine loves you and wants you to stop asking questions and fix the coolant system. Something is causing you to have low coolant levels and you need to figure out why. Take it to a reputable shop for diagnosis.
ask company to fix it
you have too many programs running. to fix this, try closing some programs, or if that does not help or worsens the situation, do the following: click on Start, click Run, and type Chkdsk. this will delete unnecessary files, thus making your computer run and process faster.
Use a piece of cigarette paper and hold it under the key, press the key down and blow into your oboe without the reed. If it continues sticking, take it to a local music shop and they should be able to fix it in a few seconds with no charge.
To fix a paper jam, you must first locate where in the printer the paper jam is, if your printer has multiple paper trays. * When you have located the jam, turn the printer off. * If you can see the paper, remove it slowly and carefully with both hands by pulling the edge out in the direction it would naturally be released. * Open the printer door to look for any stuck paper. * If there are bits of paper still inside the printer, take a piece of heavy-weight paper or cover stock and push it through the printer in the same path. This will push out any bits of paper. * Turn the printer back on. Repeat the steps if the printer still alerts you to a paper jam.
I will fix it
To fix your Wii U system that is constantly updating, simply do a software update.
how do i fix my daytime running lights on my 2001 grand prix gt headlights work perfect
With tape and glue.
To fix or disconnect the daytime running lights on a 1999 Grand Prix, you could begin by checking the running light fuse. If the fuse is damaged or blown, you can replace it to fix the lights. Remove the fuse if you want to disable to the lights.
Make the exposure. Develop and fix the negative. Expose the printing paper. Develop, fix and dry the print.
You use a 35mm enlarger to project the light on to the ''bed'' where you place your photographic paper. Then run the paper through developer, stop and fix. Make sure you put the paper in a cold water-bath for minimum of 5 minutes or until the smell of fix has gone. The fix will erode the image and it wont last as long..
leave or seek help, it wont fix itself
Look for a vacuum leak.
One can fix a paper jam on a photocopier machine by: assessing the situation, locating the problem area, pull the paper out through the paper path and clear all stuck paper from the machine carefully including small pieces, close the machine and run a test page.
I wouldn't fix it if i was you.....I have a 2000 alero, and the security system (passlock) keeps it from starting often, and it seems to be a big problem with them. So if your security system isn't working but the car is running fine I wouldn't mess with it..