answersLogoWhite

0


Best Answer

If it is only one of the passenger side turn signals, it has either a shorted power lead or an open ground; check the ground first. If both front and rear turn signals are not working, check/replace blinker module.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you get the passenger side turn signal on a 1999 cougar to work changed the bulb and all other signal lights work Any ideas?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Brake light and signal on passenger side rear not working need to fix 92 ford f150?

i have a 1992 F-150 all of my lights work but my rear passenger side brake lite and signal do not i have changed bulbs and checked all my fuses and wires what do i do?


I changed the passenger side front turn signal bulb on an 04 C5 Corvette and now the headlights won't retract and i have no instrument lights?

Check the #6 fuse in the box under the passenger side forward floor.


How do you fix the signal lights on a 1988 Mercury Cougar?

Well, you don't state the poblem, but if all your turn signals are not working and flashing as they should, replace the Turn Signal Flasher Relay.


Signal lights are not working changed fuses bulbs flasher what else could it be?

How bout the turn signal indicator switch located in the steering column.


What is wrong if the signal comes on sometimes on a 1999 mercury cougar?

What signal?


Brake on passenger work not passenger when you brake when turning signal lights are used either left or right it works..just when driving and braking left side not working?

I'm guessing you're talking about your turn signal light. From what you wrote I think I'd have to say it sounds like a bad turn signal switch. The brake lights run through the turn signal switch on mostly all vehicles.


Signal lights not working?

signal lights not working.


My 87 Honda accord brake hazards and signal lights stopped working I changed signal and brake light fuses the brakes lights are working but not signal and hazards.?

Probably the flasher unit needs to be replaced. This is an electronic switch which usually mounts underneath the dashboard.


Where is the passenger side turn signal unit on a 2003 Taurus?

Both turn signals work when they want to. The hazzard lights work just fine. All bulbs are great. The turn signal indicator will flash inside the car for a few seconds and then stop. The outisde turn signal lights stop too.


On the 1990 240sx the right turn signal light is staying on in the dash and when using the right blinker the hazzards come on and when you turn the lights on the back passenger turn signal stays on?

Sounds like you have a short in your wiring harness for your rear lights. As for your dash turn signal light, your dummy light is just acting up. You probably need a new wiring harness for your rear lights.


Why are the reverse lights not working on Chevy S10 after bulbs are changed and fuse is okay?

switch on the transmission which sends a signal to the reverse lights when shift is in reverse......... is shot. You need a mechanic.


Why would 3 of the signal lights on a 67 mustang work but the rear passenger side signal and brake light not work?

If it's not the bulb or the ground wire, check the connections. If all else fails, it's the turn signal switch.