0
To ohm out a motor one would use an ohm meter. If one does not own or can not obtain a meter, the motor can be taken to a shop and ohmed out there for a fee.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What readings are normal when testing a 3 phase motor with a mega-ohm meter?
1.46 meg ohm
What would a 24V DC motor read on a meg ohm tester between on of the power terminals and the case of the motor if the motor is shorted And grounded?
A shorted motor would read zero ohms. Note, however, that a meg ohm tester is not an appropriate test device to assess if the motor is shorted, because the difference between shorted and "operational" can often be just a few ohms - you need a low resistance test device - not a meg ohm tester.
Which motor would have higher current flow 2 ohms motor in a 6 volt circuit or a 3 ohm momtor in a 12 volt circuit?
expecto patronum! ~:)
How do you test an electrical motor to see if is electrically faulty?
There is only two test you can do measure on the Ohm scale the resistance at the power connection if there is a reading then it means it's not open but that's not an indication that the motor is Ok, then measure on the MOhm scale between the body of the motor and any of the power connections if there is a reading then the motor have a internal short, the best is to open the motor and inspect it for black spots on the coils your nose is the best test smell it
Why armature resistance is less than 1 Ohm?
why armature resistance is very low as compare to field resistance in dc motor
What is a unit used to measure resistance?
The " Ohm " is. 1 ohm is the resistance across which 1 volt of EMF appears when the current through it is 1 Ampere.
Which is bigger resistance 20 ohm or 200 ohm?
200 ohm
1 mega ohm?
1 mega ohm=______________ ohm?
What ohm speaker is best?
take a 2 ohm bridge into 1 ohm
How many ohm m for 1000 ohm cm?
10 ohm-m
How did georg ohm come up with the Ohm?
He did not come up with the Ohm, it was named after him many years after his death.
How do you ohm a transformer?
You do not ohm a transformer, in fact you do not ohm anything. Please restate your question.
