0
I just had this problem with my car (Nissan Sentra). What I did was take the door panel off from the passenger side door to see how the door handle worked and the set up. On my car the door handle has a cable that hooks to the lock assembly. When you pull the door handle the cable pulls up on the lock assembly lever then the door opens. So after taking a good look at the passenger side I was able to get an idea to where I had to pull up on the lock assembly lever on the driver side. I used a hanger to pull up on the lock assembly lever and finally got my door open. Then took the door panel off the driver side to check and fix the problem. Hope this can help you.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Where can you find Mazda MPV 2001 sliding door handles both sides Somehow broke both of them one by one?
partstrain.com
Inside passenger door handele broke 07suzuki forenza need to replace it?
There is a factory recall on some forenza door handles. Contact your dealer.
How to fix a broken door handles that will not open from the inside or outside?
how do I open a door when the handle broke and the part theat connects into the outer wall will not release?
How do you get at the motor for the driver side window on a 1995 two-door coupe?
You have to remove the door panel and anything else like door pulls and window handles.
How do you replace the driver's side inside door handle of a 1992 Toyota Corolla?
anyone has pictures out there for how to replace door handles for 92 Toyota corolla?
Which type of door handles is more effective for doors?
There are any types of door handle which are used in door. types of door handles are :- Lever on backplate handles. Lever on rose handles. D Pull handles. Flush pull handles. Doorknobs. Thumb turns. Cabinet cup handles. Cabinet pull handles
How do you open the driver's side rear door of a 1990 VW Jetta GL if both of its handles are broken?
open it from the inside? actually i had the same problem. the handles themselves were not broken but the spring inside had come out of place and i had to bend it back so that it would push down far enough to open the door, also check the salvage yards.
I broke both door handles on my olds cutlass is there a way to get in from the outside?
Yes, calla locksmith that can get inside of the guts of the door from the outside and he can "jimmy" the door open, this will probably cost you about $60 to $80 dollars. ***Improvement on this answer! You can get in through the trunk. I have the same car and have had the same problem. Have someone small crawl into the trunk and push through the backseat--on my car (97 Olds Cutlass Supreme) you can push through the backseat on the driver's side and open the doors from the inside.
My door handles are broke off my 92 mustang. How do I get in it?
take to flat heads and pry the top of the door above the handle on the in side lower your belt on to the handle and pull to the back seat
How do you remove the inside door panels on a 2003 gallant?
RIGHT INSIDE THE DOOR HANDES INSIDE OF THE VEHICLE, BOTH DRIVER AND PASSENGER-THERE IS 1 SCREW THAT U CAN TAKE OUT. THEN RIGHT ON THE PULL HANDLES THERE ARE CAPS THAT U CAN TAKE OUT AND EXPOSE THE SCREWS. JUST UNSCREW EACH ONE AND SLOWY REMOE THE DOOR.
How do you get into a 93 cutlass supreme from the outside when both of the door handles are broken?
Well both of mine broke off same car. I just loop something around what used to be part of my door handle and pull downward. Been doing this for over a year.. Sucks when I have to use my shoe because I forgot to bring a shoe string. =)
Why are brass door handles so cold?
They do not conduct as much heat as other door handles do.
