Open the trunk and remove the plastic underneath the latch of the trunk and that will reveal the back of the tail lights. you will then see the plastic peace that connect to the bulb its self then turn the plastic connector and it will come out of the tail light and you will see the bulb then just pull out the bulb and push in the new one and reverse the steps..
open up the plastic and place the light bulb in simple really
Open the trunk and remove the back plastic piece (if covered) from the backside of the taillight...locate the burned out bulb by turning on your headlights...when you find the bulb that is burned out, twist the bulb by grabbing it at the plastic end and turn it counter-clockwise then pull it straight out...now twist the bulb counter clockwise out of the plastic housing and replace it with a brand new light bulb
Open the trunk, theres a plastic cover over the light assembly, with 3 plastic screws that turn a quarter turn then pop up, pull then out, pry the cover off, find the back of the bulb housing. twist the bulb housing 1/8 turn and the bulb comes out; replace the bulb and reverse to finish the process to finish.
If you open the hood of your audi there will be a plastic cover located directly behind the head lamp. Remove the plastic cover by pushing down on a plastic lever/button. At this point the bulb will be seen and is held in place by a metal clip once taken off from bulb you can then remove it. (Make sure not to touch glass on the new bulbs, if you do wipe clean with a terri cloth. Touching the bulb will cause it to burn out.
Open trunk remove 2 plastic push pin remove cover
You need to open the trunk and pull clips that secure plastic lining inside the trunk. Next, unclip sensor, turn bulb socket to remove it from the assembly and pull the bulb out of the socket and replace it with a new bulb.
open the trunk, remove the plastic cover assy, remove the required bulb, 1/2 turn and replace same. Replace plastic cover, by pushing the plastic rivits stright in.
Open the trunk, theres a plastic cover over the light assembly, with 3 plastic screws that turn a quarter turn then pop up, pull then out, pry the cover off, find the back of the bulb housing. twist the bulb housing 1/8 turn and the bulb comes out; replace the bulb and reverse to finish the process to finish.
Gently pry the black plastic rectangular piece from around the shifter. Unplug the lighter assembly. The chrome plastic piece needs to be removed by prying the 4 clip locations. The green bulb will now be visible and can be pulled out by using a pliers with light pressure. Insert the new bulb the same way. The job is easier than you might think. Bulb # 168G. Package of 2 from Autozone for $4.00.
Depending on the package you need something like a knife, scissors, or with particularly stubborn packages you may need sheet metal shears.
-open trunk, there are about 7-9 plastic wing nuts holding the panel on remove them and panel pulls off. twist the bulb retainer out, replace bulb and replace retainer remount panel. easy