0
Sell It!!
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you program keyless entry remote for 1989 Buick Park Avenue?
The 1989 Buick Park Avenue does not come with a remote keyless entry. The keyless remote entry was not available till 1997.
How do i Program fob key?
how do i program keyless remote for 2000 Buick LeSabre
Where is the keyless remote module in a 92 buick regal?
Where remote module in a 98 buick regal
2000 buick century but no keyless remote but have keylessremote for a 2003 ponitiac gprix can you program it to the buick?
look on the back of you remote it has to have these numbers gm: 10246215 and model/fcc id: abo0204t if you need the program procedure please ask or post (locksmith)
What does it mean when the power trunk button on my 1994 Buick Roadmaster does not work from the button below the dashboard yet works from the keyless remote?
Perhaps the enabling switch concealed in the glovebox has been turned off.
How do you program keyless entry remote for 1997 buick lesabre?
Follow this link and you're good to go. Let me know if you have any questions. I've done this myself so I know how to do it. .ehow.com/how_7291758_program -remote-1997-buick-lesabre.html#ixzz1HA YkCKDX
How do you program a remote for a 2003 Buick LaSabre?
How do i program my remote car starter / lawless remote
Were can you get a replacement keyless remote to your 99 Buick lesabre?
I found some great deals on keyless remotes on ebay. You can also order them from an auto parts store or you Buick dealer.
How do you open Buick roadmaster heater blend doors?
How to unlock a buick roadmaster
How do you program a keyless entry remote 1997 buick park avenue?
To program the keyless entry remote you hold down the lock and unlock keys at the same time while within 10ft of vehicle to make sure you are within range of the remote for approx 10 seconds. the vehicle will alert with a short horn sound. if it does not respond, repeat. should only take 1-3 tries before it's done
How do you program keyless remote on 1999 Buick leSabre?
Ign off, On the data link connector use a wire to jumper terminal #8 (black/white) wire to #4 (black) wire, Turn Ign on press and hold unlock and lock button on one transmitter locks will cycle, repeat for second transmitter, disconnect wire, should do it. That is basically correct but there are more detailed instructions with a diagram at the following site: How to Program a Replacement Keyless Remote on a 1997 Buick LeSabre | eHow.com http://www.ehow.com/how_7291758_program -remote-1997-buick-lesabre.html#ixzz1HA YkCKDX
Why is your 95 Buick Roadmaster running hot?
why is my 1995 buick roadmaster running hot
