its a series of screws and bolts.. its really easy.. first the two screws on each side of the wheel well where it meets with the fenders on each side of the car.. second take the bumper lights out with the single screw either on the inside or outside (i forget).. pull out the the bumper lights and take out the lights from the light sockets on the bumper lights.. third behind the bumper lights is where the bumper support bolts on to the frame.. its alot easier if you take of the bumper support with it.. they're two 12mm bolts one on top the otherbehind each bumper light.. take off all four.. then the bumper will hang loose.. on the bottom of the bumper will be two 10mm bolts where the bumper connects to the radiator support.. take those off as well.. and voualla.. (how ever u spell it) the bumper is off when replacing any front end piece (besides the hood) it is always good to take off the front bumper.. i found out the hard way when i tried to replace my filler panel (between bumper and head light)
With your hands
The 1991 Honda Civic front bumper is secured by eight retaining bolts. Remove the retaining bolts. The bumper will come off.
yes it can with a little modification on the screws
The rear bumper on a Honda Civic is held on using several mounting screws. After remove each screw the bumper will be held on with mounting clips. The bumper can be gently pulled off.
you have to remove the bumper in order to remove the lights :)
front or back
Try looking behind the front bumper on the drivers side. You may have to remove the bumper to get access to it.
The front bumper of a 2000 Honda Civic is held on by several mounting screws. First remove all the screws, then gently pull the bumper off the remaining mounting clips.
form_title= Civic Bumper form_header= Have an expert fix your bumper. Has there been any damage to the bumper previously?*= () Yes () No How many accidents have you been in?*= {1, 2, 3, 4, 5, More than 5} Would you rather get a bumper for your Civic from the junk yard?*= () Yes () No Has your bumper on your Civic been replaced before?*= () Yes () No
Remove the bumper. There are clips on the top of the grille, as well as one screw in each fenderwell. There are also two screws and two 10mm bolts underneath the front bumper. Remove and pull the bumper straight out. The headlight is held in by four 10mm bolts.
Will a 90 crx rear bumper ant mount fit an 89 DX hatch?
Remove the Philips screw on each corner of the bumper. Remove the clips that hold the grill and bumper to the radiator support. Pull the bumper forward. Remove the 10mm bolts that mount the head light to the radiator support. Remove the 10mm bolt that mounts the head light to the fender. Remove the 10mm bolt that mounts the head light to a bracket near the bumper beam.