0
You buy or rent, if possible, coil spring compression tools.
They are long all-thread hardened bolts with a part at each end that slips over the coil.
Turning the bolt will bring the end pieces together and compress the spring to allow it's removal.
As a rule, if this is the front end of a vehicle, you will also have to remove either the upper or lower ball joint.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you remove rear coil spring on 97 Ford Expedition?
How do I remove rear coil springs
How do you remove front coil springs on 1993 G20 Chevy van?
ejaculate on them
Coil springs amc rebel?
rear leaf front coil springs
How do you replace rear coil springs?
Depends on the model and year. Some are easy and some are very hard and very dangerous to remove. If you have to compress the coil spring to remove it, my advice is to let a pro do it.
How do you install coil springs on a 1996 Camaro?
How do I install rear coil springs on a 1996 Camaro?
How do you change leaf springs to coil over shocks on a 68 cougar?
This is a custom suspension modification. Remove springs. Build a 4 or 5 link suspension syst5em including re-enforced shock mounts. Install coil overs.
Why were leaf springs replaced by coil springs and or independent suspension systems?
coil springs and independent suspension replaced leaf springs to give a better and smoother ride
Does a 1993 Dodge D150 two wheel drive truck have struts or coil springs?
Coil springs in the front, leaf springs in the rear.
What does the 2002 jeep wrangler x have leaf or coil springs?
A 2002 Jeep Wrangler has coil springs.
How do you get at the nuts holding the motor mounts to the frame on a 1999 ford ranger with a 2.5 engine?
You have to remove the coil springs and there is an opening to get at them
What is the cost of replacing coil springs on a 2002 Ford Explorer?
replacing coil springs, 2002 ford explorer
How do you replace the front coil springs on a 1999 Chevrolet Malibu?
That job should be done by a qualified technician. The coil spring has to be compressed and the lower ball joint taken loose. The control arm has to be lowered to be able to remove the springs. I do NOT recommend that you try this at home!
