You're going to have one of those "Doh!" moments here...
1. Remove the tire/wheel combo
2. Remove the caliper (2 bolts) and suspend it from the spring with a piece of wire so it isn't dangling from the brake hose. If a brake pad falls out just put it back in unless you're replacing them at the same time as a rotor (good idea).
3. Pull the rotor toward you. It just slides off the wheel studs.
Done! See? Doh! ;)
If you're replacing pads at the same time, press the brake piston back into the caliper using a C-clamp and the old brake pad. If you don't have a C-clamp large enough try using your thumbs. Remember you're pushing brake fluid back up into the reservoir so keep an eye on it. If it's been refilled since the old pads were installed there's a chance it'll overflow. Brake fluid is one of the best paint removers ever created.
Cheers
how do i remove the brake rotors for a 2003 Toyota tacoma v6 2wd
how do you replace the front rotors on Toyota Land Cruiser
sounds pretty close. sorry.
Get a shop manual for about $18 and it has pictures and everything.
Front
how do you remove front rotors from a chev 2004 silveraldo crewcab not 4wd
First remove the right and left tires, and then proceed to remove the rotors. After you have replaced the rotors put them back on.
pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.
With the wheel off, remove the calipers, then the rotors just come off.
how to remove front rotors on 2003 Nissan fronter 4 wheel drive pick up
remove stud locks
Remove the wheel, the calipers and the rotors, reverse procedure with new rotors.