Remove wheels Remove caliper ( 2 mounting bolts) Slide caliper off rotor Rotor should slide off hub
pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.
Most Honda brake rotors require a large slide hammer as they are not only pressed onto the hub, but also rusted which makes it very hard to remove. This may well require an experienced technician.
how do you remove front rotors from a chev 2004 silveraldo crewcab not 4wd
The pump is set into the front of the engine block. You have to remove the timing belt to get to it.
First remove the right and left tires, and then proceed to remove the rotors. After you have replaced the rotors put them back on.
Remove the tire and wheel. Remove the brake pads and break hardware. The brake rotor will slide off. You may need to tap the rotor with a hammer.
With the wheel off, remove the calipers, then the rotors just come off.
how to remove front rotors on 2003 Nissan fronter 4 wheel drive pick up
14mm wrench. remove 4 nuts from the front flange and 4 nuts rear flange. Careful with the driveshaft it's aluminum.
remove stud locks
Remove the wheel, the calipers and the rotors, reverse procedure with new rotors.
there should be a Honda stamp on the inside center of the rotor