The type of the rear seat of the Toyota Corolla will determine how you will remove it. For instance, for a folding seat, all that you will need to do is to lower the seat to gain access.
To remove the rear cup holder on a 1998 Toyota Corolla LE, first remove the seat. Then remove the four bolts holding the cup holder housing.
To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.
Go to the nearest mechanic he'll help you out :D LOL
Remove the rear seat, there should be an access cover underneath it
it is on the back of the seat. remove the seat and remove the black cover on the middle. the pump and the filter are together.
ANSWERIt is under the rear-seat on the Driver's side. Pull up on the front of the seat in it should release. Remove the seat and you will see an access panel with a wire coming out of it. There are four screws to remove this cover.
The fuel filter for the Corolla 1.8L is located inside the fuel tank. Remove the lower portion of the rear seat to expose a cover. Remove the cover and pump/filter assembly to gain access to the filter.
There should be a bolt at each corner of the seat. Remove and lift seat out
Look under the frigging seat. There are nuts or bolts on the brackets under there holding the seat to the floor. It is up to you to remove the right bolts.
How do you remove seats in a 2007 Camry SE
Remove lower seat cushion by popping the front of it upward from the 2 retaining clips, then sliding it forward. The seat belt buckle is bolted to the floor.
Open the trunk and disconnect the electric wires there. Go in the back seat and remove the covers/unscrew them.