There is a hole on each side of the steering wheel. Insert a 3mm rod or allen wrench into the holes and push. You are compressing a round straight spring that locks into a notch on each the airbag retaining pins. The airbag will come right out and you can then work removing the wire connectors, most likely they are melted and must be destroyed. Do NOT remove any of the trim on the steering wheel. It is not necessary.
It is illegal to remove the air bag from any vehicle.
You can't disable the airbag on the driver side. You could remove the airbag.
Turn the airbag on , crash the car , try not to die this will get the airbag out grab a pair of siccors then snip like I snipped my foreskin
how to remove driver side air bag
You will need to remove the fuse identified as "passenger airbag". the fuse box is located on the driver's side kick panel.
To remove the driver's steering wheel airbag on a 1999 Holden Commodore you will need a special set of tools to remove the 4 to 6 security screws that are holding it in. If the vehicle came equipped with a airbag, it needs to have one to remain road safe.
how do you remove a driverside airbag from a 1999 grand prix
Remove the fuse. Fuse box is located on the driver side of the dash, between the dash and driver side door.Note: The airbag is part of the safety systems in the car and should not be disarmed.
Don't do that!It's a major mistake to do that!The airbag is a safety device. It is illegal to disable an air bag without written permission from the NHTSA
You have to remove the steering wheel and driver airbag to replace this multi function switch....trust me I had to do it.
Dissarm air bags, slide it along its track to find torx mounting bolts - four of them. Remove these and unplug the airbag wiring.
try coloradofans.comit as everthing you could wanna know about colorados, it has helped me out sooo much