0
Remove the wheel, then in the middle of the drum is a cap. Take off the cap with a flat head screw driver, which reveals the bolt holding it on. Use a 32mm socket to remove, but before removing the nut you will notice has a pin tapped through the lug nut. To remove this use a flat head screw driver to straighten the pin and then tap it out. Once the nut and washer are removed use a rubber mallet to jar it loose.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Citroen saxo rear wheel bearing nut torque?
citroen saxo 1.4. what is the rear brake hub torque setting?
How do you remove the wheel hub from a Citroen Saxo VTX with out removing the suspention?
You can not, the hub is part of the suspension strut itself.
How do you remove hub caps on Citroen c1?
You must use a crow bar
How do you remove a rear hub assembly on a 97 avenger?
Remove the tire and wheel. Remove the brake assembly and rotor. Remove the axle end cap. The rear hub assembly will come off.
How do you change a wheel hub on a Chevrolet optra?
Remove the rear wheel, then the wheel hub should be on four bolts. Remove the bolts and remove the hub. Very easy job.
How do you remove the rear hub on a 1985 Chevrolet dually?
Loosen and remove center hub bolts Slide axle out Remove spanner nut Remove drum
How do i Remove rear brake hub on 1973 dodge 1 ton truck?
You have to remove the center of the axle plate and the axle to remove the brake hub.
How do you remove the brake drum on a 1992 dodge dynasty?
The rear drums come off with the rear wheel hub. You Jack up the car, remove the wheel.Remove the cap in the center of the hub. Take the cotter pin out, unscrew the wheel bearing retainer nut. Pull drum and hub off as an assembly.The rear drums come off with the rear wheel hub. You Jack up the car, remove the wheel.Remove the cap in the center of the hub. Take the cotter pin out, unscrew the wheel bearing retainer nut. Pull drum and hub off as an assembly.
How much should it cost to replace hub bearing on 1997 chevy cavalier?
Front- $50 Rear- $80 If you do it yourself. It is an easy job. 2 on a scale of 1-10. Front-- remove the wheel,remove the brake hardware,remove the hub bearing. Rear-- remove the wheel,remove the brake drum,remove the hub bearing. You don't need to remove the rear brake hardware. Very simple job...
How do you replace the rear wheel bearings on my 2002 vivaro van?
You replace it as part of the rear disc assembly. Remove rear wheel and hub nut cover undo hub nut,then remove the rear caliper and pull the disc off the stub axle.
How do you remove wheel hub of a 2000 Nissan altima?
i front or rear.
Do you have to tear into the rear end to change wheel bearings on 2002 traker?
no , if you remove the rear hub there will be four 13 mm bolts holding the retaining plate in place , remove these bolts and the rear axle will slide out , if the rear brakes will not release fully you can remove the nuts from the rear and pull hub and all at one go though be very careful if this manner is attemted
