http://clublexus.com/forums/is-second-generation/393705-diy-jdm-led-side-signal-mirror-covers-56k-warning.html take a look, it should help
remove bulb from in side the boot
You have to remove the plastic piece in the inside of the car which will expose the bolts to tighten the mirror
Remove the inside door panel of your Chevy Cavalier. Remove the drivers side mirror wiring harness, if the mirror is electric. Remove the drivers side mirror retaining bolts. Reverse the process to install the new drivers side mirror.
There are 3. one on the engine bay next to the battery, second is on the driver side left of the break side panel, and third is on the passenger side panel by the floor.
Remove the inside door panel of your Chevrolet Astro Van. Remove the wiring harness from the mirror. Remove the side mirror retaining bolts.
open the door remove screw holding molding to base of side view mirror. seperate molding from mirror. remove bolt holding top or side view mirror to A-pillar. remove bolts holding bottom side of mirror to A-pillar. disconnect wiring connector.
You need to remove the door panel. Remove the wires going to the mirror. Remove the nuts holding the side mirror. Reinstall in reverse order.
check all outside lights to insure they are not blown
no
If you have an electric side mirror you have to remove the door panel then unplug the electrical connector and then remove the screws that hold the mirror.
Chevrolet Lumina. Remove the wiring harness or the mirror linkage. Remove the mirror retaining bolts. Reverse the process to install the new passenger side mirror.
Remove the inside door panel from your 1991 Chevrolet 1500 pickup truck. Remove the wiring harness from the mirror. Remove the driver side mirror retaining bolts. Reverse the process to install the new driver side mirror.