There are are few bolts on the back of the tail light that can be accessed from inside the trunk. Then there are two screws on the bottom of the lights that can be accessed by laying underneath the rear of the car and sticking your hand up behind the rear bumper.
you have to remove the bumper in order to remove the lights :)
brake lights won't go off 1995 acura intergra
with a hammer
Well you might be able to do it by taking the moldings off in the trunk but I have always just taken the bumper right off. It is about 2 or 4 of those plastic clips and a couple boldts and the bumper is off. Then you will have full access to the boltds that hold the tail lights in place. Be careful doing it but it will only take about 5 minutes to take the bumper off.
lower the tailgate, remove the 2 screws on the side when you lower the tailgate, pull assembly out and replace
Tail lights and brake lights fuse.
Get a rock
You can access the Nissan taillights from the cargo compartment. Remove the tail light assembly cover. Remove the tail light wiring harness. Remove the tail light assembly retaining bolts.
Open rear door hatch. There on top of the rear tail lights you will see two or three screws. Remove those screws and gently remove the tail lights. When your done with the tails lights reinstall.
it would be great to know..
On a toyota tacoma 2003 SR5 when the tail lights are turned on the brake lights come on and when the tail lights are of the brake lights work just fine what could be the problem. If the truck has a trailer plug, inspect the plug and plug wiring for damage and corrosion.
Remove tire and inner fender well and change it from there. Other option is to remove the licence plate and reverse lights,reach through to the tail lights.