To replace the serpentine belt on a 1988 Celebrity:
1. There should be a routing diagram in the engine compartment. If there is no routing diagram take careful note of how the belt to be replaced is routed.
2. Use a suitable tool to release the belt tensioner, then slide the belt off of the idler pulley and then off of the other pulleys.
3. Route the new belt on all the pulleys to the tensioner.
4. Release the tensioner and slide the belt over the idler pulley.
i had to do the same thing go to auto zone
Replace serpentine belt on Chevy avalanche?HOW
How do you replace the serpentine belt in 1997 sunfire
To change the serpentine belt on a Chevy Celebrity: 1. Make note of the routing so you can get the belt back correctly. 2. Use appropriate breaker bar or ratchet to release the tensioner then take the old belt off. 3. Put the new belt in place, releasing the tensioner to get the belt over it.
how to replace a serpentine belt on 1992 grand am 2.3l
Replacement of the harmonic balancer is most conveniently done with the engine out of the car. 1. Release the belt tensioner and remove the serpentine belt. Take note of its routing. 2. Remove the bolt from the center of the balancer. 3. Use an appropriate puller to remove the balancer from the crankshaft. 4, Use the center bolt to pull the replacement balancer onto the crankshaft. Replace the serpentine belt.
Replace it.
Routing of the serpentine belt depends on which engine your car has as well as whether or not the car has air conditioning. There should be a routing diagram under the hood of the car.
Loosen the tensioner pulley on your 1988 Chevrolet Corsica. When the tensioner pulley is loose the serpentine belt will easily come off. Put the new serpentine belt on and tighten the tensioner pulley.
Saab dealer quoted 1 hour to replace the serpentine belt. The cost of the belt was $60 canadian.
How do you replace peugeot 407 serprntine belt
The 1998 Camry did not have a serpentine belt. Do you have a 1998 Corolla?