0
Routing of the serpentine belt depends on which engine your car has as well as whether or not the car has air conditioning. There should be a routing diagram under the hood of the car.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you put on a 1988 Chevrolet Celebrity serpentine belt?
There should be a routing diagram under the hood. If it is the 2.8L V6 the diagram is on a guard above the belt between the power steering pump and the water pump.
How do you replace a serpentine belt on a 1988 celebrity?
To replace the serpentine belt on a 1988 Celebrity: 1. There should be a routing diagram in the engine compartment. If there is no routing diagram take careful note of how the belt to be replaced is routed. 2. Use a suitable tool to release the belt tensioner, then slide the belt off of the idler pulley and then off of the other pulleys. 3. Route the new belt on all the pulleys to the tensioner. 4. Release the tensioner and slide the belt over the idler pulley.
How do you change 1985 Chevrolet celebrity alternator belt?
To change the alternator belt an a 1985 Chevy Celebrity: 1. Loosen the adjuster bolt and the mounting bolt. 2. Move the alternator to release the belt tension and remove the belt. Reverse to reinstall a new belt.
How can you tell if the timing belt is out on a 1988 celebrity?
2.8 and 2.5 liter celebrity engines do not have timing belts only chains.
What is the route for a serpentine belt on a 1988 Celebrity?
It should be on the fan shroud. If it isn't it is in the owners manual. If you don't have one I suggest you go to a used car lot with a car like yours and draw your schematic
How do you replace the belt tension er on a 1989 Chevrolet celebrity?
To replace the timing belt tensioner on a 1987 to 1990 Chevrolet Celebrity V6: 1. Use a 3/8" breaker bar to release the belt tension, move the belt out of the way. 2. Remove the single bolt out of the center of the fixed end of the tensioner. The belt tensioner will now come off. 3. Install the replacement tensioner and put the belt back on.
Do you have a diagram of how to put on a serpentine belt for a 1988 celebrity?
i had to do the same thing go to auto zone
How to Replacing the timing belt on a 1987 Chevrolet celebrity 2.5?
This engine does not have a timing belt, it is gear-driven. Possibly, you have broken gear teeth, causing the timing to be out of order.
Does a 1988 Chevrolet S10 with a 4 cylinder have a timing belt or a timing chain?
It has a Timing Chain.
How do you change the serpentine belt on a 1988 Corsica?
Loosen the tensioner pulley on your 1988 Chevrolet Corsica. When the tensioner pulley is loose the serpentine belt will easily come off. Put the new serpentine belt on and tighten the tensioner pulley.
How do you route the serpentine belt on a 1988 Cadillac Sedan Deville to bypass the ac compressor?
78 inch 6 rib belt.
How do you replace a serpentine belton a 1989 Chevrolet Celebrity?
To change the serpentine belt on a Chevy Celebrity: 1. Make note of the routing so you can get the belt back correctly. 2. Use appropriate breaker bar or ratchet to release the tensioner then take the old belt off. 3. Put the new belt in place, releasing the tensioner to get the belt over it.
