There are 6 or 8 small tork bolts holding the cap on.After taking the cap off there is a spring and a small bearing that comes out.After that there is a speial socket to take it off.Then the outer bearing comes next.After this the rotor should come off.After this place the rotor with the studs up.If you dont have a brass punch use a small punch to hit it in the center of the studs not to mess up the threads.There is a ring on the back of the hub that as you hit out the studs will come off.This is for the anti lock ring.After you get all of the studs out the rotor should be able to come off the hub.You might have to persude it alittle with a hammer.Then replace with the new one.Put all the studs back and hit them back in with a punch and hammer.Make sure they are flush!Then replace in reverse.Making sure to snug the nut holding in the bearing in place.Dont over tightien the bearing.
take it to a qualified dodge mechanic
The most likely problem is warped rotors. Have rotors turned or replaced. Replace front brake pads.
It sounds like you have air in your brake lines. It sounds like you have air in your brake lines.
Jack the front end up of your 1994 Ford F2 50. Remove the tire and wheel. Remove the brake pads and assembly. Tap on the rotors until they are loose. The rotors will slide off. Reverse the process to install the new rotors.
2001 forerunner front brake replacement
Did you ever get anywhere on this thread? I'm looking to replace the front bearings and rotors on my 2000 ZR2.
If you are saying it vibrates while applying the brakes just before you come to a stop, then the brake rotors are warped. You will need to have them turned and trued, and replace the front brake pads. If you are saying it vibrates while you are sitting still, then look for a vacuum leak.If you are saying it vibrates while applying the brakes just before you come to a stop, then the brake rotors are warped. You will need to have them turned and trued, and replace the front brake pads. If you are saying it vibrates while you are sitting still, then look for a vacuum leak.
how to replace break pads on 2001 4runner
The front rotors are out of round or warped, Need to have the rotors turned.
You might need new brake pads or rotors depending upon how worn down your brakes are. I have a 2003 Dodge Neon SXT and I had the front brake pads replaced for $140.
i paid $300 for new pads and 2 new rotors. plus labor
have you checked your brake fluid??