This is an easy one. There is a belt tensioner on the How_do_you_change_a_serpentine_belt_on_a_1992_Chevrolet_G20_vanof the engine which applies tension to the serpentine belt. A small wheel rides above the belt and applies the tension. Put a ratchet and socket on the bolt found in the center of the small wheel. The wheel and arm it is attached to will move up as you apply pressure to the ratchet. It is only necessary to move the small wheel and arm a short distance in order to slip the serpentine belt from under it.
The trick will be replacing the belt. If the label showing the routing of the serpentine belt is missing (usually on the air intake pipe) draw a diagram before removing the belt.
serpentine belt routingIt is usually marked on the radiator shroud and shows a diagram if not there check another vehicle with the serpentine belt diagram or go to you local library and ask to check a chilton manual on Chevy 305/350 Wayne Also, a good online resource with schematics is the AutoZone website.
drop your gadget from the 3rd floor of a building and poof you got it.
The 1994 infiniti G20 does not have a timing belt, thus you can't replace it even if you want to. The G20 has a timing chain and does not need changing ever!
help me preplace heater core in 92 Chevy van g20
Use a breaker bar or rachet to move tensioner out of the way
Remove the belt from your 1993 Chevy G 20 alternator. Remove the alternator wiring harness. Remove the retaining bolts from the alternator. Reverse the process to install the new alternator.
Front or rear?
You need to lower the fuel tank to get at it.
Take off the belts then the hoses then the belts holding it on.
Should be 2 bolts (3/4 socket) & remove & replace
yes you can.
This is an easy one. There is a belt tensioner on the top of the engine which applies tension to the serpentine belt. A small wheel rides above the belt and applies the tension. Put a ratchet and socket on the bolt found in the center of the small wheel. The wheel and arm it is attached to will move up as you apply pressure to the ratchet. It is only necessary to move the small wheel and arm a short distance in order to slip the serpentine belt from under it.The trick will be replacing the belt. If the label showing the routing of the serpentine belt is missing (usually on the air intake pipe) draw a diagram before removing the belt.