Friend just did it for me. He used a grinder and removed the head off the bolt. Bolt still wouldn't come out so grinned it flush with the bracket. Removed the bolts holding bracket so we had a little room to remove bolt. Used a center punch and knocked it out. Than touched up the bracket with black paint (let dry) where the grinder hit it. Got cables at NAPA and new ones come with a bolt and a c clip.
The tailgate cables on the S10 may have to be drilled out and must be riveted in place. GM has a recall on these cables and will replace them, parts and labor for no charge at the dealership.
The latch assembly and cable is one piece.
First you need to remove the trim bezel around the handle on the outside of the tailgate. Then remove the three bolts on the inside of the tailgate,that hold the handle in place. Next remove the latching mechanism rods from the handle,and remove the handle from the tailgate.
how do u replace a flywheel in a Chevy zr2 s10 2003 v6
1991 Chevy s10 how to replace outside window weather strip
You replace the brakes on an ABS S10 the same way you replace brakes on a non ABS S10.
how do you replace dome light in s10 chey blazer?
How do you replace the front drivers seat on a 1996 Chevy S10 pick up truck
1. lower tailgate 2. remove the two screws ( one of them is behind the tailgate "catch" bracket ) 3. pull out the light housing 4. the bulb holder is kind of a asprin bottle and you must push it it and turn, pull out bulb and replace
Yes you can.
Replace the fuel filter.
check your answer