answersLogoWhite

0


Best Answer

1. Start with the removal of the coil packs and plugs. 2. Next remove the valve cover. 3. Remove upper timing cover. You may need to remove the motor mount assembly also. 4. Remove exhaust manifold from engine. This includes separating manifold from the downtube on your exhaust. Note..manifold will be easy to remove once the head comes off. 5. Unplug any electrical connections attached to the head 6. Remove upper radiator hose from the thermostat 7. Reomve the fuel rail from the intake 8. Remove the intake. Removal of the fuel rail makes it easier to get to the intake bolts. 9. Remove camshaft pulleys. Use paint to mark the belt and pulleys with a line. This will help align your pulleys when you re-assemble 10. Remove the eight head bolts. These are tight!! 11. Now your head comes off Total average time is approximately 4 hours This is an involved project and you need above average mechanical skills. Be sure you have all the torque settings and head bolt pattern before starting

User Avatar

Wiki User

18y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace the head gasket located on a 1999 Kia Sephia?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace rear lights on a 1999 Kia Sephia?

The taillights on a 1999 Kia Sephia are replaced through the cars trunk. Remove the plastic covers from the light housings and replace the bulbs.


Where is the speed sensor on a 1999 Kia Sephia?

The speed sensor on a 1999 Kia Sephia is located on the transmission. It is just behind the bell housing for the transmission.


Change transmission filter on a 1999 Kia Sephia?

To change the transmission filter you have to drop the pan. The filter is located under the pan. When purchasing a filter they usually come with a new pan gasket.


How do you replace the head gasket located on a 1999 Nissan Sentra GXE?

Replacing the head gasket on any vehicle is a long and complicated process, however if you wish to see basic step-by-step instructions go to the related question on the right side of the page "How do you replace a head gasket?"


What does it cost to replace a head gasket on a 1999 z24?

It will cost approximately $530 to replace a head gasket in your 1999 Chevy Cavalier. The head gasket kit will cost approximately $50 and require eight hours of labor to install.


How do you change the timing cover gasket in a 1999 Chevy Monte Carlo LS 3.1?

video to learn how to replace the engine gasket..upper & lower gasket for 1999 Monte Carlo.


Where is the thermostat located in a 1999 Toyota Camry and how do you replace it?

where is the thermostat located in a 1999 Toyota Camry located and how do you replace it.


How do you replace the head gasket located on a 1999 Pontiac Grand Am GT 3.4L?

TO SEE IF IT IS YOUR HEAD GASKET DO A PRESSURE CHECK. TAKE TO A RADIATOR SHOP AND THEY CAN CHECK IT FOR YOU NO CHARGE......AND IF IS YOUR HEAD GASKET THE PARTS ARE CHEAP BUT ITS THE LABOR THAT WILL COST YOU......(6HR JOB). I HAD IT DONE......


Where is the oil filter located on a 1999 Kia Sephia?

Lower backside of engine slightly on passenger side


How do you replace the intake plenum gasket on a 1999 Ford Contour?

very carefully


What is the cost of labor to repair a head gasket?

They only Head Gasket I had to replace was on a Chevy Malibu 1999. Cost me about $1400


How much does it cost to replace head gasket in 1999 Chevy Tahoe?

Price for parts on 99 tahoe head gasket