Put your tailgate down and take the screws off on the inside of the taillight. The screws are Torx screws, so you will need Torx head screw driver. Then just give it a tug and the cover will pop right off. You will be able to change out the bulb.
Note: Torx srews are different from Philips or flat-head screws so they require a Torx screw driver which has a star-shaped head.
locate the fuse box under dash and look for brake lights replace with the right amp fuse. the fuse you pull out will have a number on it that is the apms fuse you will need to replace
How replace right head light
yes it is the same cab all parts will bolt right on
on what car
You have to replace the tail light as a whole unit. Open the tail gate. You will see two screws (star shape if I remember right) take these out. Then Pull the lens assembly out. Undo the bulb connectors byturning them quarter turn and pulling them out. There it is. Easy. Good luck.
alarm arming light
If the Avalanche came with the factory trailering package, the trailer lights are separately fused from the other truck lights. Check your fuse panel layout for a 10-amp fuse for left side and a separate fuse for right side turn signal/brake light on the trailer.
Right above oil filter under exhaust
you have to replace the parking light bold because is the same as the brake light so just replace the light bold I think is the middle one between turning light and backing light. you have to replace the parking light bold because is the same as the brake light so just replace the light bold I think is the middle one between turning light and backing light.
Right around $600.00. I just had mine done at the Dodge Dealer last month!!
you open the trunk and pull back the liner you will see a few blots remove the blots and the light should come right out.
Bulb, wire, fuse, etc.