Use a 10" extension on your spark plug, and dro pit over the plug by hand. You can reach it from the passenger side. Put a u-joint on the end of the extension; it will be right up against the firewall. You can get to it with another extension and the ratchet from there. When you re-install it's the same thing. Put the plug in the socket with the 10" extension and start it by hand. Once it's in fingertight, put the ujoint and the other extension on it. Because the plugs are down in a deep hole and you can't really see, I suggest cleaning the engine and blowing those out with compressed air before you try to pull the plugs. Get as much sand and muck out as possible so you don't get it in the cylinder, or get grit in the threads before reinstalling.
How does the average joe replace a starter in a 2002 Nissan frontier
how can i replace a brakelight bulb on a 2002 nissan frontier?
How do you replace the front wheel bearings on a nissan frontier 4x4 1999
On
how many gaskets and which ones are needed when you replace the knock sensor on a Nissan frontier w/a 3.3l v6 engine?
with your dick
Auto or stick?
First. take the old one out. Replace with New one.
£7865
Replace the hub bearings.
A 2002 Nissan Frontier bed will not fit a 2000 Nissan frontier.
If the converter is defective there is no alternative. You must replace it.