Turn key to the on position for 10 minutes until the security light stops flashing and turns off. Then take the key out and restart it. Its in your manual.
You can try using the panic button on the key chain to see if that will help. You can also try turning on the car to get it to stop.
In most cases, the security system will reset itself after 10 minutes. You can also remove the ground cable from the battery.
You can reset the 2002 Chevrolet blazer security system by removing the security system fuse. Keep the fuse out for 10 seconds and replace it to its original slot.
maybe
I am a gm service manager and there have been no security system recalls on 02 grand ams i have a 2002 grand am as well and my security systems keeps acting up it will activate then i cant use car because it wont turn off then i have to get it towed in and they reset it they showed me how to but it still doesn't work for me No need for a tow you sit in your car for 10 minutes until the security light goes off then you can start your car again. Its poor parts that GM choose to use. I love my Grand Ams ( on the 5th one)
The factory alarm causing the issue would be the security light flashing above the RPM guage. If the security light is flashing and the car will not start, follow the directions listed below. To reset the factory alarm, turn the ignition switch to the "on" position NOT the start position for 15min. You will see the security light go off after 15min.
I have pontiac grand am 2002. I reset alarm by leaving key fully on for 10 minutes until " security" light stops flashing. turn off key and wait for 15 seconds. Car will restart. Easy but annoying. Good luck
There is no reset for the fuel pump on a Jeep.
Howdo i reset my radio security code ml 500 2002
No such animal as far as I know.
how do you fix security switch on a 2002 oldsmobile alero
Unless you set a security code and remember what it is the dealer is your only option because of security system radios are vehicle specific when installed at factory vehicle needs to be hooked up ro comp at dealer and reset (approx $100)
Dodge does not use inertia/reset switches.
Driver side fuse box there is a switch you push to reset.