The factory alarm causing the issue would be the security light flashing above the RPM guage. If the security light is flashing and the car will not start, follow the directions listed below. To reset the factory alarm, turn the ignition switch to the "on" position NOT the start position for 15min. You will see the security light go off after 15min.
Turn the ignition switch to the auxiliary position. Do not start the engine. Leave the ignition switch in the auxiliary position for 30 seconds. This will reset your alarm system.
If your 2002 Ford Explorer alarm system goes off by itself, you probably have a wire that is exposed or a connection that is not completely closed. Check all wires for the alarm system and reset the system itself.
I have pontiac grand am 2002. I reset alarm by leaving key fully on for 10 minutes until " security" light stops flashing. turn off key and wait for 15 seconds. Car will restart. Easy but annoying. Good luck
how do i activate the alarm system on a 2001 bmw 330 ci
disconnect battery
Open and read your owner's manual.
On a 2002 Pontiac Grand Am: turn the key to the on position for 30 minutes or until the security light goes out. The car should start.
disconnect the batt... for 5 to 10 min to reset
The stock alarm on a 2002 Honda Civic can be reset by putting the system into program mode. Program mode is enabled by turning the key to on three times and pressing the lock button on the remote. This process must be done three times in under five seconds.
unplug the battery, this will reset the car with the alarm disabled
The factory alarm can not be disabled. It can be reset by unlocking the doors with a key or remote.
The factory alarm is part of the body computer programming and can not be removed.