With igniton turned OFF press and hold in milage reset button with it held in turn ON ignition and turn milage reset button to the RIGHT
Turn ignition switch to "ON" position. Depress and release MENU push button until SERVICE INTV = is displayed. Press and release STEP button to step through available options
once the engine is running, press the information button until it says "service due", then keep the button pressed. "service due" will now flash, keep the button pressed, then the new "miles to next service" will be shown, release the button and it's now reset. hope this helps I tried this on an 05 megane and it did not work.In additon you must press a small button next to 150mph on the speedo until it blinks and cleers instead of keeping the button pressed. good luck
On my 2006 55 plate Dynamic you toggle the computer to display the service details, hold the button in until it changes the screen to show when the next service is due.
Bora Laskin was born on 1912-10-05.
Bora Todorović was born on 1930-11-05.
Bora priča gluposti was created in 1988-05.
On my 03' I have a reset button where you hold for a couple of seconds the the service function resets and does not chime again for another 3,000 miles.
hold down mileage reset button and turn on ignition until insp turns to four dashes
With the ignition on, Press the end of the wiper stalk until miles to service appears on the dash screen. Now, press and hold the mileage reset button on the instrument binnacle for more than 5 seconds, it will start to flash. Let go This will reset your miles to service to the factorysetting and get rid of the flashing spanner ! Hope this helps a few people.
Its different depending on year, and trim package. The lube guy at any service shop should be able to walk you through it, and it is in your owners manual. On your 05 Accord, press and hold the odometer reset button while you turn the ignition switch to the on position without starting the engine. After 5 seconds the maintenance required light will reset.
# Turn off the engine. # Press and hold the select/reset button in the instrument panel, then turn the ignition switch ON (Position II). # Hold the button for at least 10 seconds, until the indicator resets.
In order to reset the change oil light on a Town Car 2003, 04, or 05, first hit the mode button until you see the oil life displayed. When on that display, hold down the mode button for 5 seconds until it displays RESET FOR NEW OIL LIFE. Once that's displayed, hold down the reset button for 2 seconds, until it displays OIL LIFE 100%.