Most dimmer switches will work with turning it to the left will make it darker and to the right will make it brighter. If you want it on or off you just push in the switch.
Dimmer switches go bad, more often than regular switches.
It can be the dimmer switch. It needs to be checked out./ A test light will check for voltage.
A dimmer switch is very helpful as if you attach one to your light switch you can control your light intensity, the Lutron Dimmer is a brand dimmer switches that provide high quality performance.
It is very simple to install a dimmer switch in place of a regular light switch.
The headlight high/low beam dimmer switch is part of the turn signal switch.The dash light dimmer is next to the headlight on/off switch.The headlight high/low beam dimmer switch is part of the turn signal switch.The dash light dimmer is next to the headlight on/off switch.
Bad dash light, or dimmer fuse. Or a bad dimmer switch itself
Lower levels of light are what causes the dimmer switch to heat up. The extra electricity that is not being used when the light is lowered is sent to the circuitry of the dimmer switch. The heating up is normal.
AnswerIf the lights work on the flash to pass but do not work otherwise either the switch is bad or the dimmer switch is bad. I just am working on a 1995 Ranger and found the dimmer switch to be bad. I checked the headlight switch and that was good so I found the dimmer switch to be the problem. I jumped the wires after unplugging the dimmer switch and lights come on. Replace the headlight dimmer switch and good to go! Hope this helps.
could be bad wiring
It was not designed to be used with a dimmer switch. You must have a halogen designed for use with a dimmer or it will not work.
The dimmer switch is adjustable. Take bolts out that support steering collum. Loosen screws that hold switch and slide it whichever way it needs to go to work.
.