i refered modulation is the sequence of message in to analog symbol( Simon haykin ,communication systems),,but i am not clear with this,couul u pls clarify?
The basic difference is that in analog modulation the modulating signal is analog signal and in digital modulation it is in digital form.
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
presentation of analog digital hybrid modulation
—Analog digital hybrid modulation seeks the ways to eliminate the incoherent quantization noise component in digital communication, instead of conveniently making it minimal.
Demodulation is needed with modulation becoz modulation it is converting analog to digital signal n we can't understand digital. That's why we require digital to analog converter or demodulator.
Adaptive delta modulation is a analog-to-digital and digital-to-analog conversion technique which is primarily used for voice transmission data and can be used for multiple purposes.
Adaptive delta modulation is a analog-to-digital and digital-to-analog conversion technique which is primarily used for voice transmission data and can be used for multiple purposes.
The most fundamental difference, I would say, is that Amplitude Modulation (AM) is a kind of Analog Modulation Technique (the modulation is applied continuously in response to the analog information signal) where Amplitude Shift Keying is a type of Digital Modulation Technique ( an analog carrier signal is modulated by a discrete signal, digital modulation methods can be considered as digital-to-analog conversion, and the corresponding demodulation or detection as analog-to-digital conversion. The changes in the carrier signal are chosen from a finite number of M alternative symbols).
Adaptive delta modulation is a analog-to-digital and digital-to-analog conversion technique which is primarily used for voice transmission data and can be used for multiple purposes.
Pulse position modulation can be analog or digital, it depends on the signal and/or the modulator used to obtain the modulation. If an analog signal is applied at the input of the modulator, the position of the pulse can assume an infinity of different timing states (the signal vary continuously) and hence an analog modulation is realised in PPM. On the contrary if the signal is digitized previously in a series of discrete states, the pulse at the output will have discrete timing interval (not continuosly). Then a digital modulation is obtained. If the signal is analog, but the modulator is digital, we will have again a number of finite state in output timing, and the PPM will be digital. To be noted that, if the number of steps in the digital modulator, is higher then the dinamic range required, the performance of the digital and analog PPM will be exactly the same. Cecking the front of the pulse of PPM with a digital oscilloscope capable of jitter measurament, we will see immediately if the position of the pulses will be continuosly variable or a number of discrete steps will be presented. We can then consider analog and digital PPM physically different.
yes