They are different terms. Amps refer to the amount of energy, volts refers to electrical "potential".
Amps * Volts = Watts.
So if you don't already know a little about electricity, it just became more confusing. One volt of power into 1 ohm resistance equals 1 amp of flow Volts = electrical pressure, Amps = current flow, ohms = amount of resistance in the circuit. dividing voltage by resistance gives you the amount of current. Dividing voltage by current gives you resistance. Muntiplying current by resistance gives you voltage If you know any 2 values, you can calculate the third. See "Ohms Law" on the internet for further reading.
P=V*I
Power (Watts) = Voltage (Volts) * Current (Amps)
The answer depends on how much current you have in the circuit. Hope this helps.
3 eighth notes equal one dotted quarter note
8 notes are not equal to one beat in fact you can not even make one beat with eighth notes it actually takes four sixteenth notes to make one beat.
16 sixteenth notes equal a whole note (1 e & a 2 e & a 3 e & a 4 e & a) =)
i found one for 65.00 new
Two half notes equal one whole notes.
Zero volts equal one watt. Watts is the product of amps times volts. Without an amperage the voltage can not be calculated. The time constant has nothing to do with the equation.
The watt is a measurement of work done by an object at constant velocity and under constant force. 1 watt, therefore, is equal to 1 Joule per second.
Unfortunately, the question as phrased is meaningless. A watt or kilowatt is a measure of voltage times current - one kilovolt at one amp of current dissipates one kilowatt of energy, but the same kilovolt at one tenth of an amp of current only dissipates 100 watts. Here's the formula: Watts = Volts * Amps
One statvolt is about 299.8 volts.
Answer: Volts x Amps = Watts This question lacks sufficient information for an answer. It isnt. One watt is equal to one Joule of energy per second. Amperage is current, or to state it more accurately, the amount of electrons passing through a point in a second.
One statvolt is about 300 volts. (299.792458)
Watts = Volts x Amps So you need to know the current. This is only for resistive load.
There are is no watts in an amp. A watt is the product of amps x volts.
It depends on the voltage. watts = amps x volts So if the potential difference (another way of saying voltage) was 1V, then a current of 1 Amp, or 1000 milliamps, would result in a power of 1 watt.
1 million electron-volts = roughly 4.45 watt-hours.By definition, 1 electron-volt is equal to the amount of kinetic energy gained by a single unbound electron when it accelerates through an electric potential difference of one volt.The watt-hour (symbolized Wh) is a unit of energy equivalent to one watt (1 W) of power expended for one hour (1 h) of time.
ummm...4(?) is this a trick question?
P=EI. MEANS POWER EQUALS VOLTAGE TIME AMPERAGE .9 X 3.7 = 3.33 WATTS. 3.33 WATTS FOR ONE HOUR AT 3.7 volts