micro controller contain system on chip memory, timers,counters where as a micro processor doesn't contain all these
Microprocessors tend to be much faster than microcontrollers. As real time systems usually don't require fast processors the additional power used for the extra speed is seen as wasted. Older boards are also preferred as it is less likely to contain bugs.
Measuring strain using micro-controller is simple and easy. When measuring using micro-controller you use points and condensers.
* Microcontrollers are sub class of Microprocessor. * Microcontrollers are generally target specific. * For example when the application requirement is to capture 2 analog signals, 5 digital signals, store 512 bytes of data, and to place a time stamp (date & time). Ø Here in the case of processor we need a ADC to process the analog signal, ROM (512 bytes or greater memory size) to store 512 bytes of data, RTC (Real time clock) to get present date and time, of course digital signals can be captured using the I/O port pins, and a RAM also has to be added. This makes the size of the PCB pretty big. Ø In the case of controller all these are found inside it, our task is to select the controller based on the requirement. The microcontroller is basically a processor with some special features like ADC, DAC, RAM, ROM, etc., in it.microprocessor is able to perform all the task done by micro controller but the microprocessor does not have any timers and counters internally for that operations it need the timers and counters from external. but micro controller can perform all the operations....
yes
In order to dump any program code onto a micro controller for a 89c51, you would first have to find access to the main controller board of the item, and plug the program code directly into that.
constructed on a single chip is called micro processor constructed on a single board is called micro controller
no answer
arm is a latest version of microcontroller
1) Define the functions the product will perform. 2) Design the hardware that will allow the functions to be implemented. 3) Design the logic that will allow the functions to be controlled (controller). 4) Design the interface between the micro-processor and the controller. 5) Code the function performance into the micro-processor. 6) Market it.
It is integrated with Processor itself. Also called Cache Memory.
processor
Every processor in a gadget is a microchip , a microchip can be a microprocessor or micro controller or something else. Example for microchip is processor in the CPU of a PC. Microprocessor 8085.
Microcontroller have inbuilt memory, interrupts, etc. Which you will need to connect externally in microprocessor. Thus, Microcontroller is better than microprocessors
Dr. Glassenhigmer invented the micro controller
Yes, a micro-controller is hardware. It is the hardware that the firmware and/or software.
what is name of latest micro processor in computer hardware in india
micro controller is software and fpga is hardware