Begin by carefully removing the door liner. There may be an assortment of screws and bolts holding the liner in place. Once all have been undone, gently left the liner up-wards and it should pull free from the door. Remove the tech screws that hold the large access panel and remove the panel. This will allow access to the electric motor and it's connections. Remove the electrical connector, reach into the door cavity behind the motor and feel for the three retaining bolts hold the motor in place. Undo the three bolts - the window motor should now be free to move. Carefully, wrestle the motor free of it's position and remove from door. Replace the motor by following the reverse of these brief instructions.
replace 1987 dodge pickup/power window motor
power window motor removal 93 sunbird
how to replace1994 grand drivers side power window motor
door panel will have to come off and more than likely the motor has rivets holding it in place so the complete window regulator will have to be taken out of the door and the rivets drilled out to get the motor off and then reinstall new motor with bolts and nuts.
don't just replace the window motor replace the whole car. get a hybrid or something
how to repair a window motor on a 380sl mercedes
Replacing 2002 Dodge power window motor driver side
How to replace a window and regulator on a 1998 checy malibu?
== ==
Must replace window regulatorhttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-motor-regulator
How do you remove and replace the motor for the drivers side power window in a 2000 Sienna
First test to see if the problem is the switch, wiring, or the motor. Here's howhttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/test-power-window-motor-and-regulatorThen replace the regulator if the switch and wiring test good. Here's howhttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-motor-regulator