Once you have the car off of the ground safely. Remove your tire, brakes, and rotor. Now you have to unbolt the balljoint, and tie rod if necesary, and the hub. Your whole strut assy should be able to be pushed out of the way and held in place with a bungee cord. The cv shaft can be yanked on to pull it out but sometimes you need to pry it out once it is out size it up to your new one. If it matches just push the new one hard into place and bolt everything tightly as it was and your done.
The 1989 Honda Prelude had 4x100mm offset. The 1989 Nissan 240sx has a 4x114.3mm offset...so, it will not fit.
How do i take the fuel filter off my honda prelude si 1989
I have a 1989 prelude si and im pretty sure there 15s
The starter on the 1989 Honda Prelude is located on the left side of the engine. It is under the radiator hose that is at the rear of the radiator.
Please reask question: Where are the VALVES ON A 1989 HONDA? How many VALVES ON A 1989 HONDA? How do I adjust the VALVES ON A 1989 HONDA?
No, they are different.
None of the dashboard lights work on my 1988 Prelude. Why?
135
The fuel pump on a 1989 Honda Prelude is located in the fuel tank. Being close to the tank allows it to pump gas more readily to the engine.
yes
on the 2.0 si and the 4w si
Qty. four...