A lug is a container for packing items. It is 161/8 x 13 1/4. When used for tomatoes it holds approximately 32 lbs.
Measure from center of one lug (stud that the lug nut bolts on to) to the center of the lug directly across from it if you have four-, six-, or eight-lug hubs. Measure using the metric side of the ruler, in millimeters. So if you have a four-lug hub and the measurement came out to 100mm, the bolt pattern is 4 X 100, which means that you have four lugs and that the separation is 100mm. Measure from the center of one lug to the center of the third stud (the one to either side of the center opposite) if you have a five-lug hub.
to measure the bolt pattern on any given wheel, you measure the two lug holes which are furthest apart. If you had a 5 lug wheel, and the star pattern were standing straight up, you would measure from the center of the top hole, to the center of the bottom right or left hole. For a 2001 Honda Accord the bolt pattern should be 4x114.3 for the 4 lug wheels, and 5x114.3 for the 5 lug V6 models.
Measure the lug holes center to center to find out if they will fit. Hope This Helps.
not usually.. but u need to measure the bolt pattern from the toyota to nissan from center to center skipping one hole and measure across, if toyota measures the same as nissan it should fit but make sure you measure the center hole where your hub axle fits, if its the same it will bolt..so there is a way
No they can't as 6 lug is an entirely different pattern than 5 lug
5 lug rims will not fit on a 4 lug car.
no six lug wheels will not fit five lug vehicles
Take a piece of paper and a pencil and lightly trace the lugs on the wheel. this will give you the pattern. Then you can go to another rim and see if it matches the holes in the rim you want to put on. Charcoal also works with this method. A second option is to measure the distance from the center of one lug nut to the center of another lug nut. If you measure the same on the rim you want to put on it and the distance is any less or greater, it will not fit.
NO
No they are only universal on 5 lug
I think you mean wheels but no a 5 lug can not be converted onto a 6 lug
That is your bolt patter. 6 lugs, 4.5" across lug-lug.