if you have lost the locking wheel nut key to remove the locking wheel nut then you can still remove the nut by getting a socket that is a tight fit on the nut and hammering it onto the locking wheel nut then it will undo. i worked in a garage for a few years and everytime a car came in with your problem that's how we solved it.
AdditionMost breakdown patrols and breakdown garages carry special tools for the removal of locking wheel nutsThe Volkswagan Beetle had a 5 bolt wheel pattern since 1938.
1984
on the side of gearbox at top a remove ns wheel to see it its an 8mm hexagen shaped bolt
Usually, the bolt to remove the steering wheel from the column is located at the point where it attached to the column. If your steering wheel has a pressure switch for the city horn located in the center of the steering wheel, you'll have to remove it to access that bolt.
Almost all Peugeot passenger cars have the same bolt pattern and similar offset, so you can use fit your alloys on other models.Also Citroen has the same bolt pattern and similar offsets.Before you do something, it is always a good idea to check the wheel specs of the vehicle.Tip:Bolt pattern has to match and offset has to be similar.
take wiper bolt of then take bolts of from under boot discconect wire then refit new 1
It has a 6 lug bolt pattern but yes you can if the wheel has the correct bolt pattern. It has a 6 lug bolt pattern but yes you can if the wheel has the correct bolt pattern.
The wheel bolt pattern is 5x115
You first have to purchase the correct light bulb for your Peugeot 207. The next step is to remove the bolt that is holding the light bulb cover in place. Then, remove the light bulb cover. finally, replace the bulb.
You cant as an amateur mechanic. The engine has to be moved to unscrew the bolt of the tensioner. Take the car to a garage.
The front wheel bearings need to be pressed into the spindles. This is something an automotive machine shop would normally do. The rear wheel bearings are bolt-on hub assemblies.
unless you are skilled mechanic take it to a garage the cam bolt sucks