The pipe must be fixed (not rolled) in the horizontal position. With the pipe horizontal, the weld is vertical. The pipe being fixed requires the welder to weld flat (top), vertical (sides), and overhead (bottom). The pipe must be fixed (not rolled) in the horizontal position. With the pipe horizontal, the weld is vertical. The pipe being fixed requires the welder to weld flat (top), vertical (sides), and overhead (bottom).
5G is a welding position for pipe. The pipe is in a fixed, horizontal position. There is a groove along the circumference of the pipe where the weld is to be made.
1g,2g,5g and 6g in pipe welding
Look at a wall. Imagine welding on that wall from left to right or right to left. That is horizontal welding.
1G is flat 2G is horizontal 3G is vertical 4G is overhead 5G is pipe
Unless it has been changed it is: 1G flat 2G horizontal 3G vertical 4G overhead 5G pipe
Welding is often done on structures in the position in which they are found. Techniques have been developed to allow welding in any position. Some welding processes have all-position capabilities, while others may be used in only one or two positions. All welding can be classified according to the position of the workpiece or the position of the welded joint on the plates or sections being welded. For Fillet welds, following are the welding positions defined: 1. Flat (1F) 2. Horizontal (2F) 3. Vertical (3F) 4. Overhead (4F) For Groove welds, following are the welding positions defined: 1. Flat (1G) 2. Horizontal (2G) 3. Vertical (3G) 4. Overhead (4G) 5. Flat 1G 6. Horizontal 2G 7. 5G position 8. 6 G position ANS BY: Vijay Hemgude. Pune (India)
In 6G the pipe/tube inclination is fixed at a 45° (+/- 5°) and is not rotated. If the welder qualifies in this position they are generally qualified for 1G, 2G, 3G, 4G, 5G, and 6G. Also depending on code and company specification They could be qualified or fillet welds in certain positions. The 6GR position is in the same inclination and inclination as above, however it has a restriction ring around the pipe/tube. This is used to qualify for T-, K-, or Y- connections.
The letter 'G' stands for 'giga' and its position represents the decimal marker. So, '5G' represents 5.0 gigaohms.
5g is equal to 5000mg so the answer is 5g
what does 5g =
5g-35 = -30
204-5g = 199