0
Probably not.
NFPA 1 "Hazard of Contents" are defined as High (with 5 levels), Ordinary or Low.
The only occupancies that have "low" rating are those primarily for storage of non-combustibles. A church is primarily an assembly occupancy and could not be rated as "low hazard", based upon the risks to numerous human occupants.
Types of occupancies other than "storage", even if incidentally storing non-combustibles, would qualify as an "ordinary" hazard, under the theory that some combustible materials will be introduced or hazardous operations conducted, or some psychological factor introduced in case of any fire or other emergency, thus requiring at least "ordinary" fire prevention and means of egress.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Match each NFPA 704 marking system description with the correct area on the NFPA marker.?
Fire Hazard: 2, Red square Special Information: 4 Health hazard: 1 Reactivity hazard: 3
What is the highest degree of a hazard identified in the diamond on the NFPA placard?
The number 4 on the NFPA 704 placard indicates the highest hazard in any of the three categories (health, fire, reactivity).
What is level 4 in the NFPA 704 labeling system?
The highest degree of hazard - severe hazard that a very short exposure could cause serious injury or death.
What are the NFPA hazard diamond ratings for Sodium Hypochlorite 12.5 percent solution?
2-0-1-ox
Identify the area of the nfpa 704 marking that indicates the reactivity hazard?
NFPA 704 Hazmat color codes: blue -- health hazard (4 being deadly) red -- fire hazard (4 being flash point below 73 F) yellow -- reactivity (4 may detonate) and white -- specific hazard (no water, radioactive, acid, alkali, corrosive, oxidizer)
What is NFPA Code?
NFPA 1002 is the Standard for Driver Operator Professional Qualifications.
What would the NFPA occupancy rating be for a church with a school?
the church hall would be an assembly occupancy, the school would be an education occupancy and the building would be a mixed occupancy.
What are the nfpa hazard diamond rating for solvent?
Health (Blue): 1 Flammability (Red): 2 Reactivity (Yellow): 0 Special (White): None
Which color in the National Fire Protection Association (NFPA) 704 system conveys information about a hazardous materials special properties?
NFPA 704 Hazmat color codes:blue -- health hazard (4 being deadly)red -- fire hazard (4 being flash point below 73 F)yellow -- reactivity (4 may detonate) andwhite -- specific hazard (no water, radioactive, acid, alkali, corrosive, oxidizer)Read more: What_does_the_National_Fire_Protection_Association_704_blue_color_code_stand_for
Is the NFPA 704M system a federal law?
NFPA codes are enacted selectively, in possibly amended forms, by each state. Similarly, different federal agencies may adopt their own standards or use NFPA standards. For example, OSHA has its own Hazard Communication System (HCS) that is completely different from NFPA 704, using pictograms, being phased in as of December 2013. USDOT also has its own standard for HAZMAT labels (e.g., orange, red, green, yellow, striped, with code numbers and code symbols).
Is there a chemical with all 4s on its nfpa hazard label?
There are reports that tert-Butyl hydroperoxide has an NFPA 704 rating of 4-4-4, but it is not available in anything over 90 percent concentration, having 2-2-3. If you are ever in a place that needs such stuff, you are strongly urged to find a different job.
What is nfpa 220?
NFPA 220: Standard on Types of Building Construction
