0
Yes.... But if the tile is glazed and/or the grout is epoxy (unlikely unless in a commercial building) these do NOT need to be sealed (neither will absorb water so they won't accept the sealer). The rule of thumb is to put a few drops of water on the tile and the grout, if it soaks in within 30 seconds it needs to be sealed. Never use a topical sealer. Always use a waterbased PENETRATING sealer. You will need to reapply bi-yearly or yearly in most situations, more if the tile is exposed to water. Hope this helps..........
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is the difference between sanded and non-sanded grout?
The obvious answer is sanded grout has sand. But the in depth answer has many differences. Sanded grout which is the most common, can be used in a grout joint from 1/8" to 1/2" (and larger but check the grout). Sanded grout scratches many tile like glass. Non sanded grout can only be used on joints 1/8" or less. Non sanded grout is typically seen on marble and granite tile, many wall tile, and all glass tile.
Is tile and grout toxic?
Grout is not toxic. Grout sealers and adhesives can be toxic but not the grout itself. Tami Barker www.mosaicforms.com Mosaic Art Instructor and Creator
Can the color of grout be changed?
Yes, you can change the color of the grout. There are products that you can use to try to die the grout or you can just have your tile re-grouted.
What tools are needed to install shower units?
There are many tools needed to install shower units. There needs to be a grout tray to help lay the tile, screw driver to install the shower head and a caulking gun to seal off the seal.
Why would ceramic tile pop up a week after being installed?
it could be a number of things, premixed thinset, to much flex in the substrate, mixed thinset too thin, didnt seal grout "if in shower" where is the tile installed, what did you use to install it and how did you install it?
Do you seal tile before you grout?
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
Do you seal travertine tile before you grout?
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
How do you clean engine oil from grout in tile?
if your grout had not been seal then it will be hard to clean and if you clean with acid the grout will be change color.
Do you need to seal tile floors?
Yes. If it is a ceramic or porcelain tile you only need to seal the grout. If you have a natural stone or quarry you need to seal the tile and the grout. Generally when you install natural stone, you seal the tile before you grout. Otherwise the colorant in the grout will seep into the tile. If the floor is existing you would seal it all at once. Don't forget to use a stripper to remove any old sealer. Make sure the stripper is acceptable for the type of flooring you are sealing. Stone can be very delicate and damage easily. Vinegar can etch marble, granite, and travertine. One last note, you get what you pay for with sealer. Invest in a good sealer and you will get much better, much longer results.
Do you seal slate tile before you grout?
Use a high-quality sealant and its specifications depending upon the requirement would be the best solution for the slate tile before grout.
When do you seal tile grout?
After you have tiled, normally you will add the bonding liquid or sealant to the grout mixture. however there are liquids on the market that you can spray onto the tiles to seal the grout, however this is a temporary and not a recommended idea. It is better to scrap all the old grout out and re-grout with the proper mixture
What is the best seaant for tile?
Aqua mix brand of sealers is some of the best and will seal both your unglazed tile and grout. You need to use a penetrating sealer because it will chemically bond to the grout.
What is a cheap chemical that is good for cleaning grout and tile?
How do I go about doing my own grout and tile cleaning? I need a cheap chemical.
tile and grout cleaning?
form_title=tile and grout cleaning form_header=11813 Describe the kind of service you are looking for.*= () Clean / Seal grout or tile () Stone or marble polishing () Replace or repair grout Give the type of surface that is involved?*= [] Kitchen [] Bathroom [] Countertops [] Backsplash [] Tub / shower or surrounding area [] Walls [] Floors [] Outdoors
Can you use floor wax as a sealer for ceramic tile?
Tile has a glass finish & doesnt need wax, Wax can cause a slip & fall hazard when it gets wet Sealing tile is a misnomer, you really only need to seal the GROUT.. stop by the Depot & get some grout sealer, better for the grout
How do you re-grout shower tile?
You pull out the old grout and re- grout the whole thing. If you do patches it never looks good.
If using floor tile on a shower wall do you have to seal it?
As long as it is not natural stone only the grout must be sealed.
