Not necessarily. If pool water has recently been shocked, the chlorine level may be too high to swim even if the water is clear. Shocking can result in 10 ppm or more of chlorine. The EPA deems up to 4 ppm as safe.
Swimming occasionally in a highly chlorinated pool may not be an issue for adults. But excessive chlorine has been known to trigger Asthma attacks in children. Also, you should rinse or bathe immediately after swimming to avoid irritated skin from the excess chlorine.
A general rule for applying all chemicals to a pool is to wait a minimum of 3 hours before swimming. That gives the chemicals time to dilute and be distributed evenly in the pool. The exception to that rule is high chlorine, which is described above.
No, if the water chemistry is right, there will be no impact on the pool water chemistry.
Improper water chemistry - stay out of the pool until they learn how to properly maintain a swimming pool. Last measure would be to test the water yourself for proper chemistry.
Inexpensive ring - improper water chemistry.
One of the best ways to prevent problems with your swimming pool is by running the pump and circulating the water. The best care for the pool varies depending on the type of pool you have but keeping proper water chemistry is important for any pool.
It's best if the water is cleaned before you close up the pool.
Lowers the Ph
Improper chemistry balances?
If the water's chemistry is not correctly balanced, it can. For example, if your pH is too low, the water can etch cement you'd materials.
You may be increasing the phosphate levels which promote algae growth.
it means your swimming in a pool with dirty water and fish.....get out!
Reduces alkalinity of swimming pool water (softens hard water)
Chlorine is added to swimming pool water to disinfect it.