What would you like to do?
Stainless steel cabinet hardware is definitely a better match than satin nickel for todays brushed stainless steel appliances. However, when it comes to stuff like (entry or closet) door handles or lighting trims for example, you'll find that satin nickel is an acceptable match when stainless steel is not an available option.
26 people found this useful
Was this answer useful?
Thanks for the feedback!
The difference is colour. Brushed nickel has a hue closer to beige and brushed stainless is closer to chrome. There is another difference, as well. Brushed nickel is easier to… clean and does not show water spots and fingerprints as easily. It does not require constant polishing to look clean. While less shiny, it fits well with granite, slate, and other stone counters to give a softer look to a kitchen or bathroom.
nothning really its just brushed Well I think it is the Finish that you get on the surface.The brush line finish....
Yes it does,however,only in small quantities.i have an allergy to nickel and it can get really bad with certain metals,however,stainless steal is k with me.
No. One is nickel, usually plated over a different base metal. The other is stainless steel. The object is usually made just of the stainless steel, with no plating…. They can look similar in appearance, but the nickel plating can eventually wear off.
Ideally, yes. If you have just a refrigerator in stainless steel, and you don't have the money at the moment to redo the hardware, then don't despair. If, however, you are p…lanning to renovate the kitchen hardware and you've got a few stainless steel appliances, you should definitely match the hardware with the silver look of the appliances. This doesn't mean that you have to purchase stainless steel hardware - any hardware with a silver finish (nickel, chrome, pewter, etc) will do the trick. The more that you create a consistent look throughout the kitchen space with your hardware, appliances, lighting choices and other decisions, the more consistent and appealing the overall decor will be.
Finishes of stainless steel when described as satin or brushed or a little to subjective to be accurate. Usually brushed is polished using an abrasive built to show a directio…nal grain, satin is generally smoother by either using a fine abrasive or using satin brushes that don't really have a grain. Satin is most commonly used for household appliances especially in Europe.
What if any is the difference between satin stainless steel and brushed stainless steel hardware finishes?
The satin finish is general finer / smoother to the touch but both the terms are used to described multiple different finishes. There are various ways of applying mechanical p…olishes belts / brushes to stainless steel each can have different levels of roughness and so finishes can vary dependent on the requirement of the end use. Ideally it is best to look and touch but not always practical often these finishes can be very similar.
Just hot, soapy water. Cream cleaners often contain abrasives which will scratch your surfaces.
A stainless revolver is made of a stronger more durable metal capable of resisting stains and corrosion even under the worst conditions. And they can be polished to a high lus…tre with great ease. They are easily serviced and returned to duty after such exposures that would destroy ordinary firearms. Nickel is a thin plate over raw steel and any loss of coverage of the plating will allow stains and corrosives into the inner metal surfaces. Blued and nickel plated guns will not be so resistant to the ravages of weather and time. Stains and rust are a constant risk to these guns. Stainless steel revolvers are less prone to gas cutting of the top strap and thereby safer. This would be a concern of someone who consistently shoots magnum and other "hot" rounds through his revolver. Or one who simply shoots a great deal such as practicing for a competition. None of any of these considerations will have any affect on the inherent accuracy of the weapon or the ability of the shooter.
The finish. Most people prefer stainless with a high shine (polished) finish. Satin has a dull finish to it (unpolished)
Sattin does not refer to a type of steel, it is a degree of finish. Therefore-considering that we do not know what particular steel is sattin finished, this question can't be …answerd.
Well the higher the level of the stainless the Less likely it is to rust. 340 grade contains more nickel
Nickel and Stainless steel are different metals and thus have slightly different colors. Stainless steel is often offered in a brushed finish which looks similar to satin/brus…hed nickel. Nickel also comes in a polished finish. If you are looking to match bathroom fixtures with a brushed finish you are probably want satin nickel. If you are looking to match kitchen appliances you probably want stainless steel.
The answer to that depends on your taste, and also the color of the brushed nickel. Each individual has their own way of seeing the world, and some people will like the two to…gether, or say that they look similar, although to me, brushed nickel often looks less shiny. But I like that. :) To help you decide if you like the combination of brushed nickel and stainless steel, you could: --Buy the product and see if you like the look at home, but ask about the store's return policies first. --You could also photograph the object in question and take that home to compare with what you have.
There are several grades of stainless. The nickel content can be from 4-12% depending on the grade. The higher grade harder materials have between 4-6%.
Cannot be determined without knowing application.
There are a number of advantages of stainless steel cabinets although there are also disadvantages. People tend to like the shiny finish to go with more modern decor. The ma…in advantage to stainless steel is that moisture and temperature changes do not seem to affect them and therefore they last longer than wood.