Cool.
It is located in the exhaust manifold{s}- It will have 1 for a four cylinder, and 2 for a V6. You will need a special socket available from just about any auto parts store.
An enzyme is a special type of catalyst that is only made by living things and used to assist their metabolic processes.
speed up chemical reaction because of the lowered activation energy
its in front of car in the exhaust manifold, u need a special socket to remove oxegyn sensor. fairly easy
The filter is located on drivers side back gas tank area up above the exhaust pipe. Follow the fuel line from the tank to the filter. Special tool is needed to replace it, just go to a Chevy dealer and let them install it for only $42.00[[User:65.89.157.4|65.89.157.4]]I just had it done.
Unplug the sensor and unscrew it from the exhaust pipe. You'll probably need a special socket to do it without damaging the wires.
the filter is on the frame rail and there is a special tool to release it
O2 sensor is located in the exhaust manifold just off the front of your motor. If you open the hood and locate your exhaust manifold, follow it down toward the radiator. you should see a 1-wire sensor sticking out of the exhaust manifold. this is your O2 sensor. you will need either a special Oxygen sensor removal tool, or a 7/8 wrench to remove it.
There are special facilities for catalyst recycling. The effort of getting platinum out of a catalyst isn't worth it due to the low quantity and hazardous for health due to the high toxicity of platinum under the conditions that the catalyst has undergone.
Need a special socket. They are located in the exaust manifold(s).
It is located under the intake manifold, if you do not have external fuel injectors. Anybody have a picture of the location? Any special instructions to replace it?
The Cobra's exhaust is made in the USA and is backed by a lifetime warranty. Their exhaust pipes are made to withstand any type of force you can bring to it.