0
the cast iron piece is broken on the handle just had to change one
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do open the gas door on a 93 jaguar XJ6?
with a hammer
1988 Jaguar XJ6 trunk handle and lock are missing but the trunk is still latched How do you get it open?
there is open trunk switch in the glove compartment
How do you open a glove compartment when the key wont open on a jaguar xj6?
I've a 1995 xj6 ,but where is the opening for the glove compartment? do it have one
89 Jaguar XJ6 can't open door from outside?
you have to take door panel off and ajust the arm that leads from the handel to the latch u need a 7mm and 8mm wrench
What size speakers in a jaguar xj6?
1988 Jaguar XJ6 stats Front Speakers: 3-1/2" Rear Speakers -Rear Door: 4" -Rear Deck: 4"
How do you open gas cap on 1993 XJ6 Jaguar?
if you mean the door to get to the petrol refill there is a white switch in the boot that you pull or push that will open it manually. you mean the cap inside that door then its a pain because my handle came of in my hand and i had to get a tea cloth and turn it and pull hard because it was being pulled down by pressure its neither then ignore all of this.
---How do you open the trunk of 1994 jaguar xj6 when you lose the main key?
my 94 xj6 has a switch in the center console glove box
How do you remove the part behind the handle to remove the door panels on a 1990 jaguar xj6?
You have to remove the inside door panel. Jags are tricky and I would suggest buying a Haynes manual if you're going to try this yourself for the first time. !
Where is the starter located on a1996 jaguar xj6?
where is located on a 1996 jaguar xj6 starter ?
What could be problem with door handle hard to pull open on 1989 jaguar xj6?
The Door handles on all Jaguar XJ6 models were designed by a moron, or group of morons. They are all made of pot metal and have a weak spot at the pivot point that pushes on the linkage that goes to the door latch. Eventually, your door handle will break and it will need to be replaced. I manufactured my own door handle and made it from a solid steel bracket that I bought from Home Depot. I cut the bracket to shape, and then cut the face of the old door handle off of the original brackets. Then I used JB Weld to attach the face of the original handle to my new steel bracket. From the outside you can't tell any difference, and my new handle will never fail again. Your only other choice is to find a used handle, which will cost you about $100.00 and will be just as crappy as the original. If You have a Pick-n-Pull near you, you can check their web site for your model year. They will only charge you about $10.00 for a used handle. Go to http://www.picknpull.com/check_inventory.aspx and check for a yard near you, and their inventory.
Where is the wiper motor relay on a 84 jaguar xj6?
location of wiper motor on 1985 Jaguar XJ6
1996 Jaguar XJ6 How do you install a CD audio deck in to a 1996 Jaguar XJ6?
u have to hard wire it in
