In order to change the torque you will need to tighten the bolt on the exhaust side of the injector to fifty inch pounds. Tighten the drivers' side bolt to nine foot pounds.
First check fuel pressure. Then take a differential reading @ the filter. May need to carry out injector cut out test to verify integrity of electronic injection.
Balance, communication, movement (torque), aerodynamics, streamlining, grip, heat conservation (sleep & hibernation), fly-swatting/scaring, decoy, sacrifice (skink/slow-worm), fat storage, defence ...
Well its pretty hard so if i were you i would just go out there at about 11 in the afternoon and there would be at least 15 to 20 lizards out in the day because they need the light and heat and the after noon is the hottest part of the day.
identify three need of motivation
They need to know what a "thaning" is.
I need a specific year... preferably with engine serial number... in order to answer this. Cat never seemed content with the 3126, and always had to change something on it.
u need a torque rench with your injector torque settings, they are on the side of the head built in in the 2.5 tds isuzu engine
Conduit clamps are used for jobs in which one deals primarily with pipes. A plumber, for example might have a need for conduit clamps, or a construction worker who is building a hose. Home Depot always has a large selection of conduit clamps available.
I need the torque urgently.
2 inch
If you mean the fuel injector for the #4 cylinder isn't working the answer is simple, either the injector is bad and needs replaced, or the connector has gone bad/ the wires are shorted out. Put an injector pulse tester on that injector (most people don't have these so you'll need to get it tested at a garage), if the injector doesn't fire when it's tested separatly you need an injector. If it does fire that means the plug/wire is the problem.
You need six pounds of pressure to torque.
Pouring the injector cleaner down the throttle body won't clean the injectors. You need to add the injector cleaner to the fuel tank for it to help you. Read the instructions on the container of injector cleaner.
the part attached to the top of the fuel injector is called the fuel rail
You;ll need an injector removal socket from Kent Moore or a Snap-on dealer.
There are several reasons why a person might use nipple clamps. A person might like the feeling the clamps on their nipples produce. Some people like to be controlled, and might be told to wear them and do so.
yo need the torque for the tires. its 75