You Will Need Breaker Bar, 15/16 socket or metric equivalent, piece of pipe to increase length of breaker bar. Remove the fuel pump fuse Place socket on big bolt in the centre on Harmonic Balancer with the Bar and pipe on top on the passenger side chassis rail. Turn car over a few times, the nut should loosen. Remove Balancer with a claw puller or if you're lucky it may just wiggle off.
Torque Setting for VS Commodore Harmonic Balancer Bolt- between 270-320 NM. The Best way is to check the bolt torque setting before you remove it.
how do I change the pads and rotors on a VS Commodore ?
Holden VS Commodore was created in 1995.
on the ground, what is the safe method to drop diff from 1996 statesman
How do you adjust rear band on transmission for a vs commodore 6hdd?f
Easiest way is to buy a removal tool, can get them from Ebay. But you can also use multi grips and a hell of a lot of wd40.
They are the aliens from planet marlboro
the answer is 56
You can find a wiring diagram for a VS Commodore Dash inside the owner's manual. You can also check with local auto part stores.
There are 3 different engines available to the VS Commodore. First is a 3.8L ECOTEC V6. The second is a 5L V8 and the third is a 5.7L V8 (an enlarged version of the 5L ) only available to the "SENATOR" version of the VS.
tacho surge
14.9 NM / 11lb.ft