Switch Ign on (do not start engine)
Set Odometer to read total miles.
Press Odometer Button (OB) until CFG1 appears in display
Release the OB.
Pressing the OB briefly will change between CFG1, CFG2, CFG3, CFG1
Once you have selected the CFG (see below).
Press the OB again for 5secs to store the new service frequency.
Turn off the ignition.
I selected CFG1 for my vehicle (05 Reg 2.8JTD), but you must decide yourself for your vehicle, should take 5mins to read this and carry out the resetting procedure
Note: If your vehicle is under warranty and you take it to be serviced by a Fiat dealer they will do this as part of the service.
CFG1 = 30000km (18,600mi) and 365 days in cases of Standard Use for 2.0 petrol and 2.8JTD versions, or in the case of Severe Use for the 2.3JTD versions.
CFG2 = 20000km (12,500mi) and 365 days in case of Standard Use for 2.0JTD versions, or in case of severe use for 2.0 petrol and 2.8JTD versions
CFG3 = 15000km (9,300mi) and 365 days in case of Severe Use for 2.0JTD versions.
how do u reset service light on 2007 plate bravo
Fiat Ducato was created in 1981.
how to top up fiat ducato gearbox
Where is the glowplug relay on a fiat ducato 2003 1.9
what is the weight of fiat ducato 2.8
There's a relay and fuse in the fuse box in the engine compartment.
The first Fiat Ducato was produced in 1981. Since then more than two point four million Fiat Ducato vehicles have been produced. It is the most common motor home in Europe.
Only a FIAT dealer can do this.
what gearbox oil for ducato 2.8 jtd
tony
in glove box
User manual (and my local FIAT garage) say this can only be done by a FIAT dealer