some rock melt at 2000F what is this temperaturein the celsius scale
I did a science project on producing concrete with molten (heated) sulfur to see if it was possible to make concrete without water. (It was.) I boiled my sulfur at 302 degrees fahrenheit, which is 150 degrees celsius. I am not sure if this is the exact boiling point, but the sulfur does boil at this temperature.
melting temperature of sugar is 145 C and sulfur is 115 C there is 30 C melting temperature difference so we can melt sulfur easily to separate from sugar. take a bowl and add mixture, set the bowl in oven and set 115 C for one or two minutes. after the time pass. immediately pour the melted sulfur into another bowl with hanger. you will get some elemental sulfur some will solidify do this again at least you gain all elemental sulfur.
Elemental sulfur is a bright yellow crystalline solid at room temperature.
sulfur melting point is minimum 116 degree centigrade, so if you are using LP tracing it is not maintain that uniform temperature and line get solidify, otherwise if you are using MP tracing the temperature is more ,ie > 150 degree centigrade. so > 150 degree centigrade the sulfur viscosity will increase. so LP jacketting is best for sulfur line
Melting point (rhombic) 112.8°C, (monoclinic) 119.0°C
Sulfur is solid at room temperature. Its melting point is 115.21 oC, 239.38 °F
The melting point of sulfur is: 115,21 ºC The boiling point of sulfur is: 444,6ºC
I did a science project on producing concrete with molten (heated) sulfur to see if it was possible to make concrete without water. (It was.) I boiled my sulfur at 302 degrees fahrenheit, which is 150 degrees celsius. I am not sure if this is the exact boiling point, but the sulfur does boil at this temperature.
melting temperature of sugar is 145 C and sulfur is 115 C there is 30 C melting temperature difference so we can melt sulfur easily to separate from sugar. take a bowl and add mixture, set the bowl in oven and set 115 C for one or two minutes. after the time pass. immediately pour the melted sulfur into another bowl with hanger. you will get some elemental sulfur some will solidify do this again at least you gain all elemental sulfur.
the melting point of sulfur is 115.21 degrees Celsius according to http://www.newworldencyclopedia.org/entry/Sulfur
melting: 115.21 ºC boiling: 444.6 ºC
a solid.....
It has a melting point of 113 degrees celieus
Elemental sulfur is a bright yellow crystalline solid at room temperature.
sulfur melting point is minimum 116 degree centigrade, so if you are using LP tracing it is not maintain that uniform temperature and line get solidify, otherwise if you are using MP tracing the temperature is more ,ie > 150 degree centigrade. so > 150 degree centigrade the sulfur viscosity will increase. so LP jacketting is best for sulfur line
At room temperature, sulfur is a solid.Yellow solid in room temperature.
Sulfur is Solid at room temperature.