A sonometer is an apparatus for investigating the vibration of a string or wire under tension. The equipment allows the length of the string and its tension to be varied. See Wikipedia entry 'sonometer' for more details
It is commonly used in Melde's experiment. A sonometer demonstrates the relationship between the frequency of the sound produced by a plucked string, and the tension, length and mass per unit length of the string. These relationships are usually called Mersenne's law after Marin Mersenne (1588-1648), who investigated and codified them.
A sonometer is a device that is used to measure the various frequencies of sound that can be made when a string is plucked. Essentially, it consists of a box that has a string run through the middle, with weights and bridges fastened to each end.
A digital Sonometer is on average 237mm high x 60mm x 38mm.
a centimeter
The holes in a sonometer will make sure the inside air in communication with outer air therefore we can hear the sound.
paper is used for writing on and can also be used for oragamy
It's used when predicting the weather, learning about what happened on the earth before there were humans, its used in computers, its used to learn more about the human body. Science is used for A LOT!
Who used up all the scotch tape? Will you buy a car that's new or used? She used a knife to slice the bread. He used to work at Mc Donalds, but he was fired. She's not used to driving such a big vehicle. He used that girl to make his wife jealous.
spearmint is some times used for toothpast and can even be used for eating
A sonometer is an audiometer. A measuring instrument used to measure the sensitivity of hearing.
Here's a tip: You don't even need a sonometer. The frequncy of DC is zero.
pichi puka answer nuvu ra petalsindhi
to produce uniform magnetic field
The sonometer wire is usually made up any material which is non-magnetic in nature.
A sonometer is used to determine the frequency of alternating current. A step down transformer is used for the determination of frequency of A.C. because the voltage of the A.C. mains is 220V, which is dangerous. The step down transformer reduces this voltage to 6 volts.
resonance
resonanace...
stationary transverse waves
pichi puka answer nuvu ra petalsindhi
Tuning forks should be struck gently and put over sonometer boxes gently due to the fragile nature of the tuning fork and the sonometer box. The tuning fork is a metal rod with two prongs that vibrate at a specific frequency when struck. This vibration can be damaged or distorted if the tuning fork is struck too hard. Similarly, the sonometer box is a box filled with metal strings or wires, and if the tuning fork is placed too hard or too quickly, the metal strings can be damaged or distorted. Gently striking and placing the tuning fork over the sonometer box is also important for accurate results. If the tuning fork is struck too hard, the frequency of the resulting vibration will be higher than desired, and if the tuning fork is placed too hard or too quickly onto the sonometer box, the vibrations will be distorted and the resulting frequency will not be accurate. In conclusion, tuning forks should be struck and placed over sonometer boxes gently in order to protect the fragile nature of both the tuning fork and the sonometer box, as well as to ensure accurate results.
Loop produce in ac frequency exp