The contrast in a DVST monitor is not sharp
They ordinarily do not display color .
Selected part of the picture can not be erased
The erasing and redrawing process can take several seconds for complex pictures.
Tube is a made up of rubber, while pipe is a round solid material.
It is the gearing, becasue the gears amplify the movement of the bourdon tube into a much larger movement of the needle on the dial. the gears are a mechanical amplifier.
I'm just concluding a work in which I had to design a shell and tube exchanger for condensation of a mixture of gases and vapor at low pressure. That was the type I chose. AEM is a type of shell and tube heat exchanger, according to TEMA standards. They use 3 letters to describe the configuration of the heat exchanger. First letter refers to the front head, second letter to the shell type and third letter to the rear end stationary head. So in this case, with a type A you would have: A for channel and easily removable cover. E as it is a one pass shell and M because you have a fixed tubesheet with a rear end in bonnet shape.
One purpose is, in an icemaker inside your refrigerators freezer, to provide 'thermo-couple' between the ice cube mold and the thermostat, such that the thermostat senses the temperature of the mold accurately, thereby causing the electrical cycling of the heater, which heats the mold only enough such as the ice cubes can be easily ejected from the mold. It's a putty-like substance that is available in a tube. ~A Nonna Muss
in dumpy level the line of sight is perpendicular to vertical axis.But in tilting level the line of sight need not be perpendicular to vertical axis .the instrument is roughly leveled in a tripod stand with respect to bubble tube & thus making the instrument approximately vertical...then it is tilted with a finely pitched tilting screw which tilts the telescope wrt to vertical...it has advantage that due to tilting levelling can be done quickly and accurately!!
the advantage is the design is complicated
The contrast in a DVST monitor is not sharp They ordinarily do not display color . Selected part of the picture can not be erased The erasing and redrawing process can take several seconds for complex pictures.
the scale that is attached to the inclined tube are more sensibly then scale in vertical form that are in U-tube manometerdisadvantage is that it is costly and tough to handle.
Vacuum tubes have superior sound quality and are typically easy for the user to replace on their own. Disadvantages include their size, rather large for portable devices, and they generally use a larger amount of power then transistors.
Advantages of shell and tube heat exchanger are: * Its compact design * Capability of withstanding high pressure Disadvantages: * It is difficult to readily inspect the shell side of the tubes for scaling or tube damage
working of direct view storage tube
If you grow your bacteria in a broth tube you can view the oxygen requirements of the bacteria (close to the bottom, anaerobe: close to the top, aerobe)
what are the advantages of a u-tube manometer than a piezometer
45000*1000GB*3= ________________GB Storage
Advantages: Simplicity of design; Easy to clean and maintain; ideal for fluids that cause fouling. Disadvantages: Length cannot be extended beyond a limit Rate of heat transfer is low + high cost when considering amt of heat transfer. Heat looses occur from the outer shell.
what is the disadvantages of pressure-tube log, acoustic- correlation log
Advantages are that you don't have to have the baby growing inside you for almost a year, and you don't have to force it out of your snatch at birth. Disadvantages are that you need a series of ever-bigger test tubes which are really expensive (although if you can afford a baby you must be rolling in spare cash anyway!), and they're easy to break, especially as you have to keep them out of direct sunlight